Ricoh D117 Service Manual page 1001

Printer Service Mode
1001 Bit Switch
This bit switch determines the timing of the PJL USTATUS JOB END sent
when multiple collated copies are being printed.
Disable (=0 (default)):
JOB END is sent by the device to the client after the first copy has
completed printing. This causes the page counter to be incremented after
the first copy and then again at the end of the job.
Enable (=1):
JOB END is sent by the device to the client after the last copy has finished
printing. This causes the page counter to be incremented at the end of each
job.
SM Appendix 3-499 D117/D118