Communication Switch 03 (Sp No. 1-104-004); Communication Switch 09 (Sp No. 1-104-010) - Ricoh D117 Service Manual

Hang-up decision when a negative
code (RTN or PIN) is received
3
during G3 immediate transmission
0: No hang-up, 1: Hang-up
4-7 Not used

Communication Switch 03 (SP No. 1-104-004)

No Function
Maximum number of page
0-7 retransmissions in a G3
memory transmission
Communication Switch 04 - Not used (do not change the settings)
Communication Switch 05 - Not used (do not change the settings)
Communication Switch 06 - Not used (do not change the settings)
Communication Switch 07 - Not used (do not change the settings)
Communication Switch 08 - Not used (do not change the settings)

Communication Switch 09 (SP No. 1-104-010)

No Function
0-7 IP-Fax dial interval setting
SM
0: The next page will be sent even if RTN
or PIN is received.
1: The machine will send DCN and hang up
if it receives RTN or PIN.
This bit is ignored for memory
transmissions or if ECM is being used.
Do not change the settings.
Comments
00 - FF (Hex) times.
This setting is not used if ECM is switched on.
Default setting - 03(H)
Comments
Adjusts the interval of the I-fax dialing.
The interval of I-fax dialing is calculated by
following formula.
[Interval time = specified value with this switch
x 0.2 msec]
95
Bit Switches
D649