4
Parts Replacement and Cleaning Procedure > Consumale Parts Requiring Periodic Replacement and Cleaning Points > Removing the Offset Roller
Removing the Offset Roller
1) Remove six screws, and then remove the upper guide.
x6
MEMO:
Do not move the shaft to the rear side , because the straight pin
comes off from the shaft.
4
Parts Replacement and Cleaning Procedure > Consumale Parts Requiring Periodic Replacement and Cleaning Points > Removing the Offset Roller
2) Remove the resin retaining ring , and then remove the offset roller.
F-4-19
F-4-19
F-4-21
F-4-21
4-9
F-4-20
F-4-20
4-9