Ring Scanner / Audio / Battery Connectors; Cradle Connector; Ring Scanner And Ring Imager; Laser Scanner - Honeywell HX3 User Manual

Ring Scanner / Audio / Battery Connectors

Connector 1 is on the left. Connector 2 is on the right. Both connect to cables for:
• Tethered Ring Scanner (Laser or Imager)
• Tethered Headset / Microphone and Battery
• Tethered Battery

Cradle Connector

Connector 3 is at the base of the HX3. It connects to the Cradle. When the HX3 is in a powered desktop cradle, the HX3
receives external power through the cradle connector.
USB Keyboard or USB Mouse input is received by the HX3 through the cradle connector when the HX3 is in a powered
desktop cradle.

Ring Scanner and Ring Imager

The trigger module and ring strap module are user replaceable

Laser Scanner.

Continuous Scan Mode

If Continuous Scan Mode has been enabled (factory default setting is 'Disabled'), the laser (or imager) is always
on and decoding.
Caution: Laser beam is emitted continuously. Do not stare into the laser beam.
1. Scan Window
2. Trigger
3. Ring Strap
4. Connector (connect to HX3)
2 - 3