Assembling The Hx3 Voice Computer And Accessories; Assembling The Headset Cable - Honeywell HX3 User Manual

Assembling the HX3 Voice Computer and Accessories

Note: Installing or removing accessories should be performed on a clean, well-lit surface. When necessary, protect the work
surface, the HX3, and components from electrostatic discharge.
1. Put the headset on.
2. Connect the headset cable (5) to the audio cable and battery connection cable (3).
3. Connect the battery connector end of the cable (3) to the battery (7).
4. Connect the audio cable end (6) to the back of the HX3.
The following pages contain detailed installation instruction for the above steps.

Assembling the Headset Cable

1. Connect the HX3 voice cable I/O connector to the I/O port on the HX3. The HX3 internal microphone and speaker are
automatically disabled.
click!
2. Slide the voice cable ends together until they click and lock in place. Do not twist or bend the connectors. The HX3 is
ready for voice-enabled applications.
2 - 6
1. Microphone
2. Headphones
3. Connects to voice cable end of voice cable
1. Headset
2. Connect To Battery
3. Audio Cable
4. Connect To Headset Cable
5. Headset Cable
6. Connect To HX3
7. Battery