Li-Ion Battery - Honeywell HX3 User Manual

Li-Ion Battery

The HX3 cannot function unless a battery is securely tethered. Be sure to place the HX3 in Suspend mode before
disconnecting a battery, or all unsaved data may be lost
The Standard battery is much thinner than the Extended battery. Each battery will fit in the battery sleeve on body-worn
cases.
When placing the tethered battery in a battery sleeve, ensure the Battery Charge/Connect terminals are protected from
accidental damage by keeping them covered by the sleeve fabric at all times.
Do not allow water or chemical cleaning agents of any kind to come in contact with the battery charging contacts or the
battery cable connector; they may be damaged. If necessary, clean them with a soft-bristle, dry brush or compressed air.
.
Standard Battery
Extended Battery
1. Battery Charge/Connect Terminals
2. Battery Cable Connector
2 - 5