Power - Honeywell HX3 User Manual

Power

Start > Settings > Control Panel > Power
The HX3 power mode timers are cumulative. Because of the cumulative effect, if the Battery Power Scheme timers are set
to 3 seconds, 15 seconds and 5 minutes:
• The backlight turns off after 3 seconds of no activity,
• The display turns off after 18 seconds of no activity (15 sec + 3 sec),
• And the device enters Suspend after 5 minutes and 18 seconds of no activity.
If the User Idle timer is set to Never, the power scheme timers never place the device in User Idle, System Idle or Suspend
modes.
The System Idle timer begins the countdown after the User Idle timer has expired and the Suspend timer begins the count-
down after the System Idle timer has expired.
When the User Idle timer is set to "Never", the power scheme timers never place the device in User Idle, System Idle or
Suspend modes (even when the device is idle).
The Display > Backlight setting is synchronized with the User Idle setting in the Schemes tab in the Power control panel.
Setting
Battery tab
Schemes tab
Battery Power - User Idle Timeout
Battery Power - System Idle Timeout
Battery Power - Suspend Timeout
AC Power - User Idle Timeout
AC Power - System Idle Timeout
AC Power - Suspend Timeout
Device Status tab
5 - 46
Default
Never
Never
Never
Never
Never
Never
No user interaction