Scanner / Imager Aperture
Caution: Never stare directly into the beam aperture.
If Continuous Scan Mode has been enabled (default is disabled), the laser is always on and decoding. Caution: Laser beam
is emitted continuously. Do not stare into the laser beam.
Handle
Handstrap
1-6
1. Handstrap
2. Handstrap Retainer Bracket and mounting screws
3. Handstrap Clip
1. Scanner / Imager Aperture
2. MX7 Front
1. Imager / Scanner Aperture
2. Trigger
3. Handle
4. Tether Attach Point