Enable Notifications; Disable Lxez Pairing Opp; Opp Send Panel; Send Selected File From Outbox - Honeywell HX3 User Manual

Enable Notifications

When checked, the user is notified and may be prompted for a response when files are received by the HX3. When
unchecked, inbound files are received with no notification to and no required action from the user. This option is
enabled (checked) by default.

Disable LXEZ Pairing OPP

When checked, OPP is disabled in LXEZ Pairing. When unchecked, OPP is enabled in LXEZ Pairing. The default is
unchecked, OPP is enabled for LXEZ Pairing.
• Because only one application can use OPP at a given time, custom applications should disable OPP in LXEZ Pairing
via an API call while the application is using OPP and restore this setting upon completion.
• When this item is checked, the other parameter settings on this screen are unavailable (dimmed).

OPP Send Panel

If LXEZ Pairing OPP is disabled, no file names or OPP servers are displayed on this tab. These areas are grayed out. Sim-
ilarly the buttons on this tab are also inactive when LXEZ Pairing OPP is disabled.

Send Selected File From Outbox

This area displays the file listing from the currently selected Outbox. All files are shown (*.*). The most recently
pushed file is highlighted, assuming that file is still present in the Outbox.

Select OPP Server from Remote Device List

This list displays the known OPP capable servers that the HX3 has previously discovered. The most recently paired
server is selected and highlighted.

Buttons

Send - Tapping this button sends (pushes) the selected file to the remote (server) device.
Cancel - Tapping this button cancels the send process initiated by tapping the Send button.
Discover - Tapping this button initiates a discovery of OPP devices. Results of the discovery are shown in the OPP
Server selection box.
6 - 10