Battery Charger Help - Honeywell HX3 User Manual

Battery Charger Help

The following is intended as an aid in determining whether the battery pack or the charger may be malfunctioning:
Issue
Battery pack does not fit in
charging pocket.
No battery pack in charger, but
any of the LEDs are on.
Charger is plugged into a live
outlet, battery pack is inserted,
but RED LED is OFF and no
other LEDs are on, or all LEDs
are off.
Charger is plugged into a live
outlet, battery pack is inserted,
but RED LED is OFF and no
other LEDs are on, or all LEDs
are off.
Charger is plugged into a live
outlet, battery pack is inserted,
but RED LED is OFF and no
other LEDs are on, or all LEDs
are off.
When you first put a fully
charged battery pack in the
charging pocket, the RED LED
comes on, indicating the
battery pack is charging.
LED is flashing RED at any
pocket.
LED is flashing RED at any
pocket.
LED is flashing RED at any
pocket.
Cause
Different manufacturer's battery
pack, or there is an object in the
charging pocket.
Dirt or foreign objects are in the
charging pocket.
Battery pack is not making
contact with battery charge
terminals in the charging pocket.
Faulty battery pack.
New battery pack, same result.
During the first few minutes, the
battery charger checks the
battery pack for correct voltage
and charge state. During this
time the LED is RED and is
continuously ON. After charging
is complete, the LED is GREEN.
Current could not be sourced
through the battery pack due to
age, exhaustion or damage to the
cell(s). The battery pack does
not communicate with the
charger.
The charger's timeout period has
expired.
The battery pack voltage has not
reached 6.0V within 30 minutes
and the charger has timed out.
Solution
Check if the HX3 battery pack has Honeywell part
number HX2A301BATTSTD /160289-0001 or
HX2A302BATTEXT/160320-0001 on the label. If
not, do not use.
Remove the object from the charging pocket.
Unplug charger from AC supply. Remove any dirt or
foreign objects from the charging pocket. If the LEDs
continue to remain ON, the charger may be
defective. Return charger to an authorized
Honeywell service center.
Push battery pack in firmly. Do not "slam" the battery
pack into the charging pocket.
Replace battery pack.
Contact Customer Support
replacement options.
There is nothing wrong with the battery pack or
charger.
Do not "top off" a fully charged battery pack by
repeatedly placing it in the charging pocket. The
battery pack may overheat and be damaged.
Contact Customer Support
pack replacement options.
Make sure that the battery pack temperature is within
specification and retry charging. Contact
Support (page 14-1) if problem repeats, for battery
pack replacement options.
Contact Customer Support
pack replacement options.
(page 14-1) for
(page 14-1) for battery
Customer
(page 14-1) for battery
12 - 9