Chapter 2 - Getting Started; Overview; About This Guide; Out Of The Box - Honeywell HX3 User Manual

2
Getting Started

Overview

The HX3 is a small, lightweight wearable voice computer. The HX3 is designed for use with voice applications while the user's
hands are actively engaged with the physical environment, including piece picking to carts, containers or conveyers; case
picking; parcel moves; and broken case activities.
The HX3 keypad is designed for use with voice applications. Because of the limited design, the HX3 should be connected via
ActiveSync or Windows Mobile Device Center to a host computer running LXEConnect when a full keyboard is needed (for
example, during system configuration). The HX3 does not have a touch screen. If the host computer has a touch screen,
instructions using "tap" and "stylus" instead of "click" and "mouse" apply.
Note: Contact Customer Support
the application or control panels presented in this guide.
The HX3 can be docked in a desktop cradle. The HX3 batteries can be re-charged while the HX3 is in the desktop cradle. The
batteries are also re-charged in a Battery Charger. When the HX3 is docked in a powered desktop cradle, connection is broken
between the tethered battery and the HX3. The HX3 begins receiving power through the powered desktop cradle connector. It
may be necessary to wake the HX3 from Suspend when it is inserted in the desktop cradle.

About this Guide

This HX3 User's Guide provides instruction for the system administrator to follow when configuring a HX3. Also included are
setup and use instructions for the Battery Charger and Desktop Cradle.

Out of the Box

After you open the shipping carton verify it contains the following items:
• HX3 wearable voice computer
• Rechargeable battery
• Quick Start Guide
If you ordered accessories for the HX3, verify they are also included with the order. Keep the original packaging material in the
event the HX3 should need to be returned for service. For details, see

Initial Setup for the HX3

Note: The HX3 does not have a touch screen. If the host computer has a touch screen, instructions using "tap" and "stylus"
instead of "click" and "mouse" apply.
Note: ActiveSync or Windows Mobile Device Center must be installed on a host computer with a USB port.
1. Connect the HX3 using the USB-Client cable to the host computer.
2. Copy LXEConnect setup files from the HX3 to the host computer.
3. Install and launch LXEConnect on the host computer.
4. Accept the End User License Agreement (EULA).
When HX3 configuration is complete, exit LXEConnect on the host computer and disconnect the ActiveSync connection and
cable. Contact Customer Support

End User License Agreement (EULA)

When a new HX3 starts up a EULA is displayed. It remains active until the Accept or Decline button is clicked. Click the
Accept button to accept the EULA terms and the HX3 continues the startup process. The EULA is not presented to the
user again. Click the Decline button to decline the EULA and the HX3 will reboot. It will continue to reboot until the Accept
button is clicked.
Note: The EULA will be presented after any operating system upgrade or re-installation, including language-specific
operating systems.
(page 14-1) for upgrade availability if your application or control panels are not the same as
(page 14-1) if any of the above steps causes issues.
Product Service and Repair (page 14-1).
2 - 1