OnAir 1500 Digital Mixing Console
5.12.8.2
Fader Cal Page
0 dB Position
5-116 Operation
First, select the fader module to be calibrated by clicking on the correspond-
ing button. The screen then changes as follows:
Always required; please note that it is recommended to perform this calibra-
tion for all faders of a fader module at a time.
First, move all faders not to be calibrated to their –20 dB position (this posi-
tion will be ignored during calibration).
Then move the fader(s) to be calibrated to their 0 dB positions.
Click on the 0 dB button.
SW V6.0
Document generated: 06.08.14