Date Time Page - Studer OnAir 1500 Operating Instructions Manual

OnAir 1500 Digital Mixing Console
5.12.8.4

Date Time Page

5-118 Operation
As long as no external time reference signal is configured, the internal clock
is used as time reference, the Time Sync Reference indication is None,
and the sync indicator in the upper left corner of the clock dial is gray. To set
the system date or time, click on the corresponding Set Date or Set Time
button. The current settings are indicated in the Day/Month/Year or Hours/
Minutes/Seconds fields; adjust with the rotary encoders below the fields.
To save the new settings, click on Apply.
If you need the screen clock to temporarily display a time different from the
true time, click on the Set Offset button; the offset can be entered with the
rotary encoder below the Offset Time field, in a range of ±12 hours and with
a resolution of 30 minutes. To activate the temporary offset, click on Apply.
An active offest is indicated by the Offset indicator turning red. The offset
is automatically reset to 0:00 upon re-booting the console.
SW V6.0 Document generated: 06.08.14