Snapshots During Login; Snapshots During Power-Up; User Warnings - Studer OnAir 1500 Operating Instructions Manual

OnAir 1500 Digital Mixing Console
5.6.2.7

Snapshots During Login

5.6.2.8

Snapshots During Power-up

5.6.2.9

User Warnings

Warning:
Context: Warning No.:
User Login
Load Snap via GPInput
Load Snap via Desk Key
Load Snap from User GUI
Shot Page
5-36 Operation
• On login of any user, this user's default snapshot is loaded if available
• On login of the default user (or logout of any other user, respectively), the
default user's default snapshot is loaded if available.
The default snapshot may include audio, input routing, output routing, and/
or assignment parameters, such as any other snapshot.
Please note that login is possible only while the core is powered up, since the
user data are stored within the core.
Example: If a user desires his preferred rotary assignment only loaded when logging in,
he simply creates in the 'default' folder a snapshot named 'default' that only
contains his rotary assignment parameters.
At power-up the default user is logged in, and his default snapshot is auto-
matically loaded, if available.
In contrast to the abovementioned local user dialog boxes and warnings gen-
erated by the user GUI itself, the snapshot extension also generates its own
user warnings, as shown in the table below.
SNAPSHOT, Snapshot File 'my
FirstSnap' not found or invalid!
Snapshot not loaded.
5000
No
Yes...
Yes...
Yes...
... if none of the requested snap-
shot files (.aud, .irt,
.ort, .ass) could be
opened.
SW V6.0
SNAPSHOT, Snapshot cannot
be loaded. Incompatible
snapshot file version 'my First-
Snap'.
5002
Yes...
Yes...
Yes...
Yes...
... if the file cannot be opened,
or if the snapshot file version
doesn't match the current soft-
ware status.
SNAPSHOT, Snapshot File 'my
FirstSnap' corrupted!
5003
Yes...
Yes...
Yes...
Yes...
... if no snapshot file version is
found, or if the CRC checksum is
invalid.
Document generated: 06.08.14