Track Selection - Studer OnAir 1500 Operating Instructions Manual

OnAir 1500 Digital Mixing Console
5.16.5.1

Track Selection

5-142 Operation
Let us assume that the memory device contains tracks named T00001.wav
to T00017.wav in the \Music folder, and that track T00005.wav should
be played.
If not done yet, route the USB channels 3 and 4 to the desired fader strip:
• Press the rectangular INPUT key in the desk's FUNCTION section. The
OLED displays in the fader strips will then show their input mapping and
the input routing icon.
• Turn the desired strip's rotary knob until the display shows USB.
• Confirm the selection by pressing the illuminated
• Turn the rotary knob until the display shows USB 3/4.
• Confirm the selection by pressing the illuminated
Now the playback file can be selected:
• When touching the rotary knob now, the display shows Files.
• Confirm by pressing the illuminated
displayed. If a track is displayed in grey it has a different sampling rate
than the one the console is currently set to (it can be played anyway, but
will have a wrong pitch).
• The available tracks are listed by turning the rotary knob. Turn until the
desired track is displayed.
• Confirm the selection by pressing the illuminated
scrolls into the display, the selection icon is replaced by the input routing
icon, and the track is selected for playback, as shown below.
SW V6.0
key.
key.
key. The first playable track is
key. The track name
Document generated: 06.08.14