Studer OnAir 1500 Operating Instructions Manual page 166

OnAir 1500 Digital Mixing Console
User Access Privilege
Rotary assign functions
Desk_KeyMapping.xml
Processed :
Assigned :
Response Time
5-110 Operation
Cue/PFL Also in the configuration tool, the cue mode (alternative to pfl mode) can be
chosen to be "Pre" or "After" VoiceMix processing. For selecting these cue
modes, please see
For access to VMix parameters, privileges may be defined within a policy.
see chapter 5.10.7.
VMix assign On/Off as well as the Weight parameter can be configured to be
used on the rotary module - see
A global VMix On/Off button can be configured on the desk surface. This is
done in the file Desk_KeyMapping.xml.
See the table 'Assignable Global Functions' in
On the VoiceMix page, labels and control elements of the VoiceMix process
are displayed.
Clear All The 'Clear-All' button releases all channels previousily assigned to this
VoiceMix process.
'Clear-All' also clears assigments of Logical Inputs which are currently not
on a fader.
Underneath it, the number of processed and assigned channels is shown.
The number of Logical Inputs currently processed by the VoiceMix process.
The number of Logical Inputs assigned to the Voice Mix process.
This includes also Logical Inputs, which are currently not on a fader.
ON The 'On' button activates the VMix processing.
The response can be set from 20ms up to 4s. Recommended setting is 50ms but
the engineer's ears have to decide. The Response Time cannot be compared
with release- and attack-times of dynamic processes. This time sets how fast
the crossfades between the VoiceMix calculated gain values are executed and
how fast VoiceMix is reacting on the occurring changes of the signals.
SW V6.0
chapter 6.5.14.
chapter 6.5.37.3
chapter 6.5.37.4.
Document generated: 06.08.14