Adjustments, Repair, Cleaning; Usb Sockets - Studer OnAir 1500 Operating Instructions Manual

OnAir 1500 Digital Mixing Console
A943.074502 to 6-Fader Ext.
2.2.3

Adjustments, Repair, Cleaning

Danger:
Replacing the Supply Unit:
Cleaning:
2.2.4

USB Sockets

Core, Front:
DATA / LOGIN
REC / PLAY
Important
Core, Rear:
2-4 General
Qty Description
6 Key caps, printed OFF
6 Key caps, printed CUE/TB
20 Key caps, 16 × 12.5 mm
1 Linking Set (2 threaded plates, 4 screws M4 × 8
1 Allen key 3 mm
+ Cable Cat5/RJ45 shielded, to Nano SCore, 5 m
Description
Options:
Rack/table mount kit for 6-fader desk
Table mount kit for 6-fader extension module
Monitoring/TB box OnAir 1500
+ Cable Cat5/RJ45 shielded, to Nano SCore, 20 m
All internal adjustments as well as repair work on this product must be per-
formed by expert technicians!
The primary fuse is located within the power supply module and cannot be
changed. In case of failure, the complete power supply unit must be replaced.
Please ask your nearest Studer representative.
Do not use any liquids to clean the exterior of the unit. A soft, dry cloth or
!
brush will usually do.
For cleaning the display windows, most of the commercially available
!
window or computer/TV screen cleaners are suited. Use only a slightly damp
(never wet) cloth. Never use any solvent!
The OnAir 1500's Nano SCore is equipped with different USB slots that are
used for different purposes:
Used for user login as well as for saving/loading console snapshots. This also
offers a convenient possibility for backup purposes or for copying parameter
settings from one console to a next one. For creating a login USB stick refer
to chapter 5.17.5.6
A USB memory device for recording or playing audio data connects here.
Direct connection to a DAW for recording/playback of up to 8 channels.
MCH I/O
These two sockets cannot be used simultaneously.
The REC / PLAY USB socket may, of course, also be used for an external hard
drive. If this drive takes its power supply from the USB socket, its consump-
tion must not exceed 500 mA. Supplying the unit from an external supply unit
is strongly recommended.
USB memory devices MUST NOT BE REMOVED from the socket
!
DURING DATA ACCESS – only remove any of them after its LED has
stopped flashing in order to avoid data loss!
For information on formatting USB memory devices refer to
The two USB sockets at the rear allow connecting a USB mouse and keyboard
in order to facilitate configuration settings if required.
SW V6.0
Part no.
A943.071033
A943.071035
A943.071030
A943.074600
C098.002024
C054.201048
Part no.
A943.074000
A943.074100
A943.073000
C054.201078
chapter 5.16.1.3.
Date printed: 06.08.14