Table of Contents
Advertisement
OnAir 2500 Digital Mixing Console
5.3.8.2
(Admin) Fader Cal Page
0 dB Position
5-36 Operation
First, select one of the fader modules to be calibrated by touching the cor-
responding button. The screen then changes as follows:
Always required; please note that it is recommended to perform this calibra-
tion for all faders of a fader module at a time.
First, move all faders not to be calibrated to their –20 dB position (this posi-
tion will be ignored during calibration).
Then move the fader(s) to be calibrated to their 0 dB positions.
Touch the 0 dB button.
SW V3.0
Date printed: 18.07.08
Advertisement
Table of Contents
