Studer OnAir 1500 Operating Instructions Manual page 150

OnAir 1500 Digital Mixing Console
Weight (VoiceMix)
Off Air Record
5-94 Operation
To deassign the channel from the VMix process, simply touch on the VMix
Assign button again.
The VMix Assign button is greyed out if the logical input is assigned to a
VoiceMix process, but cannot be processed as no free member is currently
available.
Channel is not
assigned to VMix
process
As soon as the channel is assigned to the VMix process, the parameter
'Weight' becomes active. Weight may be used to control the relative levels
should one of the talkers have a thin voice such they need more gain when
in the mix.
For a complete description of the VoiceMix functionality please refer to
chapter 5.12.6.
REC PF Assigns the channel's pre-fader signal to the Record bus.
Assigns the channel's after-fader signal to the Record bus (if, however, REC
PF is activated simultaneously, the signal will be pre-fader). At the same
time it disconnects the channel from the PRG A bus, and all other channels
currently not in record mode from the Record bus.
Note: REC PF and Off Air Record are provided for two different user philoso-
phies. It is recommended to only use one of them. Mixing these two functions
while operating the desk does not make sense and is not recommended.
One of the two REC PF or Off Air Record functions above may be pro-
grammed to the REC key on the channel strip.
SW V6.0
Channel is assi-
gned to VMix
process
Document generated: 06.08.14
Channel is assigned
to VMix process, but
cannot be processed as
no free members are
available in the VMix
process