Studer OnAir 1500 Operating Instructions Manual page 202

OnAir 1500 Digital Mixing Console
################################################
# Define here multicast groups that will
# be joined to receive container infos.
MulticastGroup = 239.255.0.1
MulticastGroup = 239.255.0.2
MulticastGroup = 239.255.0.3
#
################################################
Operation
5-146 Operation
• The short
MulticastGroups.ini
for multicast communication. If the default addresses are not ok, please
ask your IT/network administrator for assistance and modify them. The
default
MulticastGroups.ini
• Generate a shortcut to
for a convenient start of the tool.
Installation is complete now.
Start the System Viewer either by a click on its desktop icon (shown left) or
on
SystemViewer.exe
look similar to the screenshot below.
As you can see, this is a fairly large networked system. The list can be sorted
per column, as familiar from Windows operation, by clicking on the title bar
of the desired column.
In case of a network problem, the System Viewer window will be empty.
SW V6.0
file defines which addresses are used
file is shown below.
and move it to your desktop
SystemViewer.exe
within in its folder. The System Viewer window will
Document generated: 06.08.14