Studer OnAir 1500 Operating Instructions Manual page 217

User Login
Document generated: 06.08.14
7 Click on Create File.
The newly created Login.ID file is saved in the same folder that contains
the Remote Config Tool application.
8 Copy it from there to the user's USB stick.
When opening this file with a text editor such as Notepad, you will see its
contents: the user's name and his encrypted password:
Note: If no password is needed for a user, the procedure described above can be
skipped; the file can then also be created in a text editor without using the
Remote Config Tool. Just copy the syntax exactly, enter the user name and
leave the password entry empty, such as shown below.
When this is done, save the file on the user's USB stick under the name
Login.ID.
Each time the user's USB stick is plugged into or removed from the DATA /
LOGIN USB socket, the user is automatically logged in/out. The user name
and his last loaded snapshot are displayed for a few seconds in the FUNCTION
OLED display after logging in. If a default snapshot was saved for this user,
it is automatically loaded to the desk as well.
When pressing the FUNCTION rotary knob during operation, the OLED
display indicates this user information, too.
SW V6.0
OnAir 1500 Digital Mixing Console
Operation 5-161