When lit for the rst time, the replace will emit a slight odor for a couple of hours. This is due to the curing of paints,
sealants and lubricants used in the manufacturing process. This condition is temporary. Open doors and windows to
ventilate area. Odors caused by the curing process may cause discomfort to some individuals.
It is normal for replaces fabricated of steel to give off some expansion and/or contraction noises during the start up or
cool down cycle. Similar noises are found with your furnace heat exchanger or cook stove oven.
Figure 62: Pro ame 2 handset.
TC36_D & TC36_DAR_101215-52
First Fire
Special Operator Note
NOTE: Pilot may take
up to 30 seconds to ignite
each time the "ON" button
has been selected.
Remote Control Operation
Blue back lit LCD display
ON/OFF Key
THERMOSTAT Key
UP/DOWN Arrow Key
MODE Key
37
5056.427D