Vent Pipe Sealant; Insulated Collar Shield (Included) - Town & Country Fireplaces TC36 Instruction Manual

APPROVED "HIGH TEMP."
SELF-ADHESIVE TAPE
All outer joints of the vent pipe must be sealed with the approved "High Temperature" self-adhesive aluminium tape
provided. Wrap the tape completely around the joint and press rmly in place.
After sealing the vent pipe an insulation and cover (Pt# TC36.9709 included) must be installed around the vent pipe,
ush with the top of the unit and secured by tting tabs through slots and bending over tabs 180° (Figure 49). The parts
required are included.
*NOTE: bending tabs to 90° away from arc bend prior to installation eases the process.
COVER (2 pcs.)
TC36_D & TC36_DAR_101215-52

Vent Pipe Sealant

Figure 48: TC36D Sealing vent joints.

Insulated Collar Shield (Included)

VENT PIPE
Figure 49: TC36D Collar shield.
VENT PIPE
INSULATION
BEND
TABS
29
5056.427D