When lit for the rst time, the replace will emit a slight odor for a couple of hours. This is due to the
curing of paints, sealants and lubricants used in the manufacturing process. This condition is temporary.
Open doors and windows to ventilate area. Odors caused by the curing process may cause discomfort to
some individuals.
It is normal for replaces fabricated of steel to give off some expansion and/or contraction noises during the
start up or cool down cycle. Similar noises are found with your furnace heat exchanger or cook stove oven.
Figure 1: Pro ame 2 handset.
TCWS38D.ver2_150815-16
Special Operator Note
NOTE: Pilot may take up
to 30 seconds to ignite
each time the "ON" button
has been selected.
Remote Control Operation
First Fire
Blue back lit LCD display
ON/OFF Key
THERMOSTAT Key
UP/DOWN Arrow Key
MODE Key
5
5056.42524D2