Timer Triggered Operation Settings [Event] > [Timer]; Timer 1 To 4 - Canon VB-R11VE Operation Manual

Timer Triggered Operation Settings
[Event] > [Timer]
The timer function can generate events that can trigger operations, such as video recording and e-mail notifications, at
regular intervals.
You can set the following two types of timers.
• 24 hours continuous from specified timer
• Within specified time only
Either type can be set to trigger timer events at regular intervals.
Note
Timer events are different than [Timer] in [Control for Admin] > [Preset/Initial Setting] > [Preset Setting] > [Auto Control Settings] tab
(P. 177).

Timer 1 to 4

You can register up to 4 timer events.
[Timer Event]
Select whether to use a timer event.
[24-Hour Continuous Setting]
When set to [Enable], the timer event will be repeated at the interval in [Repeat Interval] for 24 hours, starting from the time
specified in [Start Time].
When set to [Enable], only [Video Record] operations will be performed.
[Start Time]
Enter the start time of the timer event in 24-hour format. The timer event will be triggered at the start time.
[End Time]
When [24-Hour Continuous Setting] is set to [Disable], enter the end time in 24-hour format for repeating the timer event.
The timer event will be triggered at the end time.
[Repeat Interval]
Select a repeat interval for timer events. The timer event will be triggered at the selected intervals.
Operation
Set the operations to be performed when timer events are triggered.
[Start Time Preset]
When [24-Hour Continuous Setting] is set to [Disable] and you specify a preset, the camera angle will automatically move to
the preset location at the time set in [Start Time].
110
R10
R11