Canon VB-R11VE Operation Manual page 125

[Client Private Key Status]
If no client private key is installed, [Not Installed] is displayed. If a client private key is installed, [Installed] is
displayed.
This is displayed only when [Authentication Method] is set to [EAP-TLS].

Certificate Management
This is displayed only when [Authentication Method] is set to [EAP-TLS], [EAP-TTLS], or [EAP-PEAP].
Important
• If any CA certificates, client certificates, and client private keys already exist when installing certificates, they are discarded and
new versions are installed.
• An error occurs if the format of the certificate or private key to be installed is incorrect.
• Client certificates and client private keys are checked as a pair when installing, and an error occurs if they do not match.
• The certificate and private key used for 802.1X authentication must be installed as separate items, irrespective of the installation
status of certificates for SSL/TLS.
[Install CA Certificate]
Installs a CA certificate.
Specify the certificate file to be installed using [Browse] and click [Exec].
[Install Client Certificate]
Installs a client certificate.
Specify the certificate file to be installed using [Browse] and click [Exec].
This is displayed only when [Authentication Method] is set to [EAP-TLS].
[Install Client Private Key]
Installs a client private key.
Specify the private key file to be installed using [Browse] and click [Exec].
This is displayed only when [Authentication Method] is set to [EAP-TLS].
[Client Private Key Password]
Enter the password for the client private key.
Required when a password has been configured for the private key.
This is displayed only when [Authentication Method] is set to [EAP-TLS].
[Delete Certificate]
Deletes all installed CA certificates, client certificates, and client private keys.
Only "CA Certificate" is displayed when [Authentication Method] is set to [EAP-TTLS] or [EAP-PEAP], but any
installed client certificates and client private keys are also deleted.
4
125