Mdns - Canon VB-R11VE Operation Manual

[Host Name]
You can register the camera host name in name server using alphanumeric characters.
Do not use "_" (underscore) in the host name in Internet Explorer 8/9/10/11.
[Host Name Registration with DDNS]
When you enter a name into [Host Name] and select [Enable], the host name will be registered in the name server.
Registering the host name to DDNS is useful when operating with [IPv4 Address Setting Method] set to [Auto (DHCP)]
(P. 64). DNS server registration settings must be set in advance. Contact your system administrator for the DNS server
4
settings.
[Search Domain]
Enter a domain name and click [Add] to add the domain name to the Search Domain List.
Specify the host name without specifying a domain name for a server, such as the upload server, to search domains in the
form "host name + domain name", where the domain names are specified in the Search Domain List.
Do not use "_" (underscore) in the domain name in Internet Explorer 8/9/10/11.
[Search Domain List]
A list of domain names added using [Search Domain].
The function queries the DNS server for each domain name starting from the top of the list.
Use the ▲▼ buttons on the right to change the order of the domain names.
To delete a domain name, select one from the list and then click [Delete].

mDNS

This will configure settings for using multicast DNS. If you use mDNS, the IP address and host name of the camera will be
broadcast to other hosts on the network.
[Use mDNS]
Select this to enable or disable mDNS.
67