Canon VB-R11VE Operation Manual page 47


Connect by Specifying Camera Information
Click [File] menu > [Connect].
1
The [Connection settings] dialog box appears.
Enter the connection settings for the camera.
2
(1) [Host Name]
Enter the host name or IP address of the camera (P. 37).
(2) [Administrator User Name]
Enter the administrator user name for the camera (P. 42).
(3) [Administrator Password]
Enter the administrator password for the camera (P. 42).
(4) [Enable SSL Communications]
Select this to connect to the camera using SSL communication.
Normally, disabling SSL communication (the factory default setting) is not an issue (P. 123).
(5) [Port]
Set the HTTP port number to 80, 443 or a value in the range of 1024 to 65535.
Normally use [80] (factory default setting) (P. 89).
Click [OK].
3
A confirmation message will appear.
Note
Connecting to the camera with the Camera Angle Setting Tool will disconnect connections to that camera from Viewers and
recording software, except for those connecting via RTP.
Click [Yes].
4
You will connect to the camera and live video from it will appear.
(1)
(2)
(3)
(4)
(5)
3
47