Canon VB-R11VE Operation Manual page 148


Click on the Video Display Area or Use the Sliders
Move by Clicking on the Video Display Area
If you click in the video display area, the camera angle will change to center on the mouse pointer location. If the
camera angle does not center on the desired location with a single click, repeat the operation.
Note
While using the Viewer PTZ, clicking on the video display area does not work.
Move Using the Sliders
Drag the pan and tilt sliders to pan and tilt the camera.
Drag the zoom slider to zoom the camera.
The slider can also move by clicking directly on the slider bar..
Slider When Using Digital Zoom
If you set [Camera] > [Camera Settings] > [Camera Control] > [Digital Zoom] to [Enable] on the Setting Page, the
digital zoom range will appear on the zoom slider and you will be able to use digital zoom.
Note
The higher the digital zoom ratio, the lower the video quality.

Use [Pan/Tilt/Zoom] in Control for Admin
You can pan, tilt and zoom the camera with [Control for Admin] > [Pan/Tilt/Zoom].
148
Digital Zoom Maximum Telephoto
Digital Zoom Range
Optical telephoto end
Max. Wide-Angle
Zoom Slider
Drag upward to zoom in (telephoto), drag
downward to zoom out (wide-angle).
Tilt Slider
Move the camera vertically.
Pan Slider
Move the camera horizontally.