[Event] > [Timer]; Timer Triggered Operation Settings; Timer 1 To 4 - Canon 1064C001 Operation Manual

[Event] > [Timer]

Timer Triggered Operation Settings

The timer function can generate events that can trigger operations, such as video recording and e-mail notifications, at
regular intervals.
You can set the following two types of timers.
• 24 hours continuous from specified time
• Within specified time only
Either type can be set to trigger timer events at regular intervals.

Timer 1 to 4

You can register up to four timer events.
[Timer Event]
Select whether to use a timer event.
[24-Hour Continuous Setting]
When set to [Enable], the timer event will be repeated at the interval in [Repeat Interval] for 24 hours, starting from the time
specified in [Start Time].
When set to [Enable], only [Video Record] operations can be performed.
[Start Time]
Enter the start time of the timer event in 24-hour format. The timer event will be triggered at the start time.
[End Time]
When [24-Hour Continuous Setting] is set to [Disable], enter the end time for repeating the timer event in the 24-hour format.
The timer event will be triggered at the end time.
[Repeat Interval]
Select a repeat interval for timer events. The timer event will be triggered at the selected intervals.
Operation
Set the operations to be performed when timer events are triggered.
R13 R12 M50
[Start Time Preset]
When [24-Hour Continuous Setting] is set to [Disable] and you specify a preset, the camera angle will automatically move to
the preset location at the time set in [Start Time].
It is necessary to set presets beforehand with [Camera] > [Preset] (P. 131).
R13 R12
Important
When the camera is moved to a preset position specified in the [Start Time Preset] settings, camera control privileges are released, even
if the user has obtained those camera control privileges using the Camera Viewer or other camera control applications.
M50
The following settings can be configured here.
• Timer 1 to 4
• Operation
5
167