Configure Operations For Triggered Detection ([Event] Tab) - Canon VB-R11VE Operation Manual

Detection Status for Intrusion Detection
All moving objects detected are shown with contour lines.
When [Decision Point] of a moving object larger than [Object Size (%)] enters a detection area and exceeds
[Duration (Sec)], its contour lines take on the same color as the detection area, indicating that "detected" mode has
been triggered.
Important
After the Triggered Detection is set, please confirm that the system continues to show contour lines of the Detected Moving
Object.

Configure Operations for Triggered Detection ([Event] Tab)

Set operations to be performed upon detection of changes in a subject.
This will also explain the [Event] tab in [Auto Tracking].
Video Detection
(1) Specify Operation Timing (Multiple Selections Possible)
[ON Event Operation]
When selected, the operations set in (3) are performed when "detected" mode is triggered.
[OFF Event Operation]
When selected, the operations set in (3) are performed when "detected" mode ends.
Object Size Indicator
Detection Area
Contour Lines of Detected Moving Object
Auto Tracking
(1)
(3)
(4)
(5)
(6)
R10
R11
6
(2)
(3)
(4)
(5)
(6)
227