Configure The Preset Tour Route; [Tour Route Settings] Tab - Canon VB-R11VE Operation Manual

Configure the Preset Tour Route

You can have the camera automatically tour multiple registered presets to allow monitoring.
Important R11 R10
• Since use of preset tour could lead to overuse of the camera, possibly resulting in camera malfunction, it should only be used when
necessary. The amount of camera move in unit time can be reduced by increasing the duration the camera pauses at each point along
the tour.
• Intelligent Function cannot be used while using preset tour.
Note
Preset tour is not performed while the camera is being controlled, such as with the Admin Viewer or the Admin Tools.
Preset tour is not performed when control privileges are obtained by RM-Lite.

[Tour Route Settings] Tab

Since the number of tour routes you can register, the numbers of preset that can be toured per route and the tour conditions
vary depending on the camera model, screen configurations differ as follows.
R11 R10
(3)
(1) (2)
(5)
(4)
(6)
5
179