Canon VB-R11VE Operation Manual page 209

Setting view restrictions At wide-angle, the camera operating
automatically restricts angle would allow capture outside
the camera operating the view restrictions if the angle
angle. remained the same. Therefore, it is
narrowed automatically.
Camera
• If the view restriction will be exceeded as a result of zooming toward wide-angle, the camera will first pan and tilt to a position where the
maximum wide-angle zoom will be within the viewing restriction area. Wide-angle zoom control will then be enabled within the view
restriction area.
First, the center of the
maximum wide-angle
zoom is panned and
Captured video
tilted.
Restricted view angle
Zoom
out
• Reducing the view restriction may also reduce the zoom range.

Auto Flip and View Restriction Settings
Under the following conditions, when the View Restriction Setting Tool is launched or [Restore settings] is clicked, a
message appears indicating that the view restriction setting values are disabled and
the left of the [View Restriction Settings] setting value input box.
Conditions
• [Apply the view restriction] is selected.
• [Camera] > [Camera Settings] > [Camera Control] > [Auto Flip] is set to [Enable] in the Setting Page (P. 76).
• When [Camera] > [Camera Settings] > [Installation Conditions] > [Image Flip] is set to [Disable] in the Setting
Page (P. 78): [Lower Limit], [Left Limit], or [Right Limit] has been entered for [View Restriction Settings].
• When [Camera] > [Camera Settings] > [Installation Conditions] > [Image Flip] is set to [Enable] in the Setting Page
(P. 78): [Lower Limit], [Left Limit], or [Right Limit] has been entered for [View Restriction Settings].
[Save settings] is clicked when [View Restriction Settings] is enabled.
Under the above conditions, a message also appears indicating that Auto Flip is disabled when [Save settings] is
clicked.
When you click [OK] in the message, Auto Flip is disabled and the [View Restriction Settings] are saved.
Restricted view angle
Camera operating angle
Captured video range
After panning and
tilting, wide-angle
zoom control is
enabled within the
view restriction.
Zoom
out
(warning icon) appears to
6
209