Change/Delete A Privacy Mask - Canon VB-R11VE Operation Manual

To add privacy mask areas, repeat steps 2 to 5.
5
You can save up to 8 privacy masks.
Important
• Check privacy mask settings again if you change the [Basic Settings] > [Video Settings] > [All Videos] > [Video Size Set]
settings on the Setting Page.
• You will need to set the position of the privacy mask again if you change the [Image Flip] setting in [Camera] > [Camera
Settings] > [Installation Conditions] on the setting page.
• If you reconfigure privacy mask settings after you changed the [Camera] > [Camera Settings] > [Camera Control] > [Image
Stabilizer] on the setting page, reconfigure all privacy mask positions and sizes.
R11 R10
• After registering a privacy mask, pan, tilt and zoom the camera to confirm the areas you want to mask do not become visible
when the camera direction is altered.
• Privacy masks may deviate slightly from the specified position depending on the zoom position.
• If you change the privacy mask settings after saving a panorama image using the Panorama Creation Tool, you must use the
Panorama Creation Tool to recreate the panorama image.

Change/Delete a Privacy Mask


How to Select a Privacy Mask
There are two ways to select a privacy mask area.
• Click the privacy mask area you want to change in the privacy mask registration area.
• Keep clicking [Next] until you select the privacy mask area you want.
198
Privacy Mask Areas
Privacy mask
registration area
Privacy Mask Areas