Canon VB-R11VE Operation Manual page 200


Enter Values for Detailed Position and Size Settings
You can configure detailed position and size settings for the camera angle and privacy mask areas by entering
values.
If you select a privacy mask and click [Detailed Settings], the fields for entering values will appear.
(1) [Pan], [Tilt], [Zoom]
The settings for pan, tilt and zoom appear here if you saved privacy masks using [Quick add] or clicked [Get
camera position]. You can also directly enter the setting values.
(2) [Get camera position]
Click this to load the current camera pan, tilt, and zoom settings and display them in (1).
(3) [Privacy Mask Position and Size]
The position and size settings for the selected privacy mask appear here. You can also directly enter the setting
values.
(4) [Preview settings]
Click this to preview the settings entered in (1) and (3) in the video display area and privacy mask registration
area. The preview results are not saved to the camera.

Enable/disable a Privacy Mask
Select the check box to enable the settings of a selected privacy mask area.
Clear the check box to temporarily disable a privacy mask area without deleting it. The disabled privacy mask area
will be displayed with a crossed out frame.

Delete a Privacy Mask
Select the privacy mask area you want to delete.
1
Click [Delete].
2
The selected privacy mask area is deleted from the camera.
200
(1)
(2)
(3)
(4)
R11 R10
R11 R10
R11 R10
R11 R10