Canon VB-R11VE Operation Manual page 63

Video Record • Video Settings (P. 72)
• Upload (P. 96)
• Memory Card (P. 101)
• E-mail Notification (P. 102)
Event • External Device (P. 104)
• Audio Settings (P. 87)
• Audio Detection (P. 107)
• Timer (P. 110)
• Switch Day/Night (P. 112)
• Linked Event (P. 113)
Security • User Restrictions (P. 118)
• Host Restrictions (P. 119)
• SSL/TLS (P. 121)
• 802.1X (P. 124)
• IPsec (P. 126)
Memory Card (P. 130) Perform memory card operations or configure settings.
Maintenance (P. 134) Check logs or settings, or perform camera maintenance.
User Page
Link to web page customized by the user.
For information on the User Page, contact a Canon Customer Service Center.
Settings for uploading video via HTTP or FTP when an
event is triggered.
Settings for recording video to a memory card when an
event is triggered.
The settings of this item are the same as those of the
[Memory Card] menu. The settings can be made with
either of them.
Settings for sending an e-mail notification to a specified
recipient when an event is triggered.
R11 M641 M741
Operation settings for external device output and for
external device input triggered events.
R11 M641 M741
The settings of this item are the same as those of [Video
and Audio] > [Audio Settings].
R11 M641 M741
Detected changes in audio input from the microphone
connected to the camera can trigger operations such as
video recording or e-mail notification.
The timer function can generate events that can trigger
operations, such as video recording and e-mail
notifications, at regular intervals.
The camera angle can be moved to preset positions when
events cause Day Mode and Night Mode to switch.
R11 M641 M741
By linking two types of events, a single event is triggered.
Used for adding new authorized users that can access the
Admin Viewer, and for setting permissions for users.
Separate access control from IPv4 and IPv6 addresses
can be set.
Certificate creation, administrative settings and encrypted
communication settings.
Settings for 802.1X authentication and authentication
status display, and for certificate administration.
Settings for using IPsec.
4
63