Canon VB-R11VE Operation Manual page 109

[Scream Detection Event]
Select whether to use scream detection event.
[ON Event Operation]
If [Enable] is set, [Preset], [Video Record] and [E-mail Notification] will be executed according to their settings when a
scream detection event (ON event) is triggered.
R11
[Preset]
If you specify a preset, the camera angle will automatically move to the preset location when a scream detection event is
triggered.
It is necessary to set presets beforehand with [Control for Admin] > [Preset/Initial Setting] > [Preset Setting] (P. 170).
Important
When the user has camera control privileges, those camera control privileges are released if the camera is moved to a preset position
specified in the [Preset] when triggered by a scream detection event.
[Video Record]
Select whether to record video depending on the scream detection event.
If you select [Enable] and a scream detection event is triggered, video will be transmitted to the recording destination
specified in [Video Record Action] (P. 96).
[E-mail Notification]
Select whether to send an e-mail notification depending on the scream detection event.
If you select [Enable] and a scream detection event is triggered, an e-mail notification will be sent.
To use e-mail notification, you must set [Video Record] > [E-mail Notification] (P. 102) beforehand.
[External Device Output for ON Event]
Select whether external device output (1 or 2) is active or inactive when an ON event is triggered.
4
109