Table of Contents
Advertisement
IMBA-H810 ATX Motherboard
Figure 4-15: SATA Power Drive Connection
The SATA power cable can be bought from IEI. See Optional Items in Section 2.4.
®
4.6 Intel
AMT Setup Procedure
The IMBA-H810 is featured with the Intel® Active Management Technology (AMT). To
enable the Intel® AMT function, follow the steps below.
Step 1:
Make sure at least one of the memory sockets is installed with a DDR3/DDR3L
DIMM.
Step 2:
Connect an Ethernet cable to the RJ-45 connector labeled LAN1_USB1.
Step 3:
The AMI BIOS options regarding the Intel® ME or Intel® AMT must be enabled,
Step 4:
Properly install the Intel® Management Engine Components drivers from the
iAMT Driver & Utility directory in the driver CD. See Section 6.8.
Step 5:
Configure the Intel® Management Engine BIOS extension (MEBx). To get into
the Intel® MEBx settings, press <Ctrl+P> after a single beep during boot-up
Page 71
Advertisement
Table of Contents
