Table of Contents
Advertisement
5.4.1 PCH-IO Configuration
Use the PCH-IO Configuration menu (BIOS Menu 19) to configure the PCH parameters.
Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc.
Chipset
Auto Power Button Status
Restore AC Power Loss
> PCI Express Configuration
> PCH Azalia Configuration
Power Saving Function(ERP)
PEG port configuration
USB Power SW1
USB Power SW2
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
BIOS Menu 19: PCH-IO Configuration
Restore AC Power Loss [Last State]
Use the Restore AC Power Loss BIOS option to specify what state the system returns to
if there is a sudden loss of power to the system.
Power Off
Power On
Last State
Power Saving Function(ERP) [Disabled]
Use the Power Saving Function(ERP) BIOS option to enable or disable the power
saving function.
Disabled
Enabled
Page 102
[Disabled (ATX)]
[Last State]
[Disabled]
[1 x16 PCIE]
[+5V DUAL]
[+5V DUAL]
The system remains turned off
The system turns on
D
The system returns to its previous state. If it was on, it
EFAULT
turns itself on. If it was off, it remains off.
Power saving function is disabled.
D
EFAULT
Power saving function is enabled. It will reduce power
consumption when the system is off.
IMBA-H810 ATX Motherboard
Select AC power state
when power is re-applied
after a power failure.
---------------------
: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1:
General Help
F2:
Previous Values
F3:
Optimized Defaults
F4:
Save & Exit
ESC: Exit
Advertisement
Table of Contents
