Table of Contents
Advertisement
IMBA-H810 ATX Motherboard
5.3.5 SATA Configuration
Use the SATA Configuration menu (BIOS Menu 7) to change and/or set the
configuration of the SATA devices installed in the system.
Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc.
Advanced
SATA Controller(s)
SATA Mode Selection
SATA1 Port
SATA2 Port
SATA3 Port
SATA4 Port
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
BIOS Menu 7: SATA Configuration
SATA Controller(s) [Enabled]
Use the SATA Controller(s) option to configure the SATA controller(s).
Enabled
Disabled
SATA Mode Selection [IDE]
Use the SATA Mode Selection option to configure SATA devices as normal IDE devices.
IDE
AHCI
[Enabled]
[IDE]
Empty
Empty
Empty
Empty
Enables the on-board SATA controller(s).
D
EFAULT
Disables the on-board SATA controller(s).
D
Configures SATA devices as normal IDE device.
EFAULT
Configures SATA devices as AHCI device.
Enable or disable SATA
Device.
---------------------
: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1:
General Help
F2:
Previous Values
F3:
Optimized Defaults
F4:
Save & Exit
ESC: Exit
Page 83
Advertisement
Table of Contents
