Table of Contents
Advertisement
IMBA-H810 ATX Motherboard
Figure 4-5: Cooling Kit Support Bracket
Step 2:
Place the cooling kit onto the socket LGA1150 CPU. Make sure the CPU
cable can be properly routed when the cooling kit is installed.
Step 3:
Mount the cooling kit. Gently place the cooling kit on top of the CPU. Make
sure the four threaded screws on the corners of the cooling kit properly pass
through the holes of the cooling kit bracket.
Step 4:
Secure the cooling kit by fastening the four retention screws of the cooling kit.
Step 5:
Connect the fan cable. Connect the cooling kit fan cable to the CPU fan
connector on the IMBA-H810. Carefully route the cable and avoid heat
generating chips and fan
blades.Step 0:
Page 63
Advertisement
Table of Contents
