Usb Power Selection; Figure 4-13: Msata Setup Jumper Location; Table 4-4: Bios Options And Configured Usb Ports; Table 4-5: Usb Power Source Setup - IEI Technology IMBA-H810 User Manual

IMBA-H810 ATX Motherboard

Figure 4-13: mSATA Setup Jumper Location

4.4.5 USB Power Selection

The USB power selection is made through the BIOS menu in "Chipset
Configuration". Use the USB Power SW1 and the USB Power SW2 BIOS options to
configure the correspondent USB ports (see Table 4-4) and refer to Table 4-5 to select
the USB power source.
BIOS Options
USB Power SW1
USB Power SW2

Table 4-4: BIOS Options and Configured USB Ports

Options
+5V DUAL
+5V

Table 4-5: USB Power Source Setup

Please refer to Section 5.4.1 for detailed information.
Configured USB Ports
LAN1_USB1 (external USB 3.0 ports)
LAN2_USB2 (external USB 2.0 ports)
USB1 (internal USB 2.0 ports)
USB2 (internal USB 2.0 ports)
USB3 (internal USB 2.0 port, Type A)
Description
+5V dual (default)
+5V
PCH-IO
Page 69