Table of Contents
Advertisement
IMBA-H810 ATX Motherboard
5.3.9.2 Parallel Port Configuration
Use the Parallel Port Configuration menu (BIOS Menu 13) to configure the serial port n.
Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.
Advanced
Parallel Port Configuration
Parallel Port
Device Settings
Change Settings
Device Mode
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
BIOS Menu 13: Parallel Port Configuration Menu
Parallel Port [Enabled]
Use the Parallel Port option to enable or disable the parallel port.
Disabled
Enabled
Change Settings [Auto]
Use the Change Settings option to change the parallel port IO port address and interrupt
address.
Auto
IO=378h;
IRQ=5
IO=378h;
IRQ=5, 7
[Enabled]
IO=378h; IRQ=5
[Auto]
[STD Printer Mode]
Disable the parallel port
D
Enable the parallel port
EFAULT
The parallel port IO port address and interrupt
D
EFAULT
address are automatically detected.
Parallel Port I/O port address is 378h and the
interrupt address is IRQ5
Parallel Port I/O port address is 378h and the
interrupt address is IRQ5, 7
Enable or Disable
Parallel Port (LPT/LPTE)
---------------------
: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1:
General Help
F2:
Previous Values
F3:
Optimized Defaults
F4:
Save & Exit
ESC: Exit
Page 93
Advertisement
Table of Contents
