Download
Share
Print this page
IEI Technology IMBA-H110 User Manual
  1. Manuals
  2. Brands
  3. IEI Technology Manuals
  4. Motherboard
  5. IMBA-H110
  6. User manual

IEI Technology IMBA-H110 User Manual

Atx motherboard with a 6th generation lga1151 support
Hide thumbs Also See for IMBA-H110:

Advertisement

Quick Links

Download this manual
IMBA-H110 ATX Motherboard
MODEL:
IMBA-H110
ATX Motherboard Supports 6th Generation LGA1151
Intel® Core™ i7/i5/i3, Pentium® or Celeron® CPU,
Intel® H110 Chipset, DDR4, HDMI, DVI-I, iDP, SATA 6Gb/s,
USB 3.2 Gen 1, Dual Intel® GbE LAN, HD Audio and RoHS
User Manual
Page i
Rev. 1.01 – June 30, 2020

Advertisement

loading

Related Manuals for IEI Technology IMBA-H110

Summary of Contents for IEI Technology IMBA-H110

  • Page 1 IMBA-H110 ATX Motherboard MODEL: IMBA-H110 ATX Motherboard Supports 6th Generation LGA1151 Intel® Core™ i7/i5/i3, Pentium® or Celeron® CPU, Intel® H110 Chipset, DDR4, HDMI, DVI-I, iDP, SATA 6Gb/s, USB 3.2 Gen 1, Dual Intel® GbE LAN, HD Audio and RoHS User Manual Page i Rev.
  • Page 2 IMBA-H110 ATX Motherboard Revision Date Version Changes June 30, 2020 1.01 Modified the available configuration options of the DVMT Pre-Allocated BIOS item. October 31, 2016 1.00 Initial release Page ii...
  • Page 3 IMBA-H110 ATX Motherboard Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
  • Page 4 IMBA-H110 ATX Motherboard Manual Conventions WARNING Warnings appear where overlooked details may cause damage to the equipment or result in personal injury. Warnings should be taken seriously. CAUTION Cautionary messages should be heeded to help reduce the chance of losing data or damaging the product.
  • Page 5 PTIONAL TEMS 3 CONNECTORS ......................15 3.1 P ..............16 ERIPHERAL NTERFACE ONNECTORS 3.1.1 IMBA-H110 Layout ..................16 3.1.2 Peripheral Interface Connectors ..............17 3.1.3 External Interface Panel Connectors ............... 18 3.2 I ..............19 NTERNAL ERIPHERAL ONNECTORS 3.2.1 +12V Power Connector ................... 19 3.2.2 Additional Power Connector ................
  • Page 6 IMBA-H110 ATX Motherboard 3.2.11 Fan Connectors (System) ................28 3.2.12 Front Panel Audio Connector ................ 29 3.2.13 Front Panel Connector .................. 30 3.2.14 I C Connector ....................31 3.2.15 Internal DisplayPort Connector ..............32 3.2.16 Keyboard and Mouse Connector ..............33 3.2.17 LAN LED Connectors ..................
  • Page 7 IMBA-H110 ATX Motherboard 4.7 H ............. 66 SIZE NSTALLATION 4.8 S ..................68 YSTEM ONFIGURATION 4.8.1 AT/ATX Power Mode Setting ................68 4.8.2 Clear CMOS Button ..................69 4.8.3 DVI/CRT Selection Switch ................69 4.8.4 Flash Descriptor Security Override ..............70 4.8.5 mSATA Setup Jumper ..................
  • Page 8 IMBA-H110 ATX Motherboard 5.3.6.1 Legacy Console Redirection Settings ............98 5.3.7 CPU Configuration ..................99 5.3.8 SATA Configuration ..................101 5.3.9 NVMe Configuration ..................102 5.3.10 USB Configuration ..................103 5.3.11 iEi Feature ....................104 5.4 C ......................... 105 HIPSET 5.4.1 System Agent (SA) Configuration ..............
  • Page 9 List of Figures Figure 1-1: IMBA-H110 ........................2 Figure 1-2: Connectors ........................4 Figure 1-3: IMBA-H110 Dimensions (mm) ..................5 Figure 1-4: Data Flow Diagram ...................... 6 Figure 3-1: Peripheral Interface Connectors ................16 Figure 3-2: +12V Power Connector Pinout Location ..............19 Figure 3-3: Additional Power Connector Location ..............
  • Page 10 IMBA-H110 ATX Motherboard Figure 3-27: SMBus Connector Location ................... 44 Figure 3-28: SPI Flash Connector Location ................45 Figure 3-29: SPI EC Flash Connector Location ................. 46 Figure 3-30: TPM Connector Location ..................47 Figure 3-31: USB 2.0 Connector (Type A) Pinout Location ............48 Figure 3-32: USB 2.0 Connector Pinout Locations ..............
  • Page 11 IMBA-H110 ATX Motherboard List of Tables Table 1-1: IMBA-H110 Specifications ................... 9 Table 2-1: Packing List ......................... 12 Table 2-2: Optional Items ......................14 Table 3-1: Peripheral Interface Connectors ................18 Table 3-2: Rear Panel Connectors ....................18 Table 3-3: +12V Power Connector Pinouts ................19 Table 3-4: Additional Power Connector Pinouts ...............
  • Page 12 IMBA-H110 ATX Motherboard Table 3-28: USB 2.0 Connector (Type A) Pinouts ..............48 Table 3-29: USB 2.0 Connector Pinouts ..................49 Table 3-30: DVI-I Connector Pinouts ..................52 Table 3-31: HDMI Connector Pinouts ..................52 Table 3-32: USB 3.2 Gen 1 Port Pinouts ..................53 Table 3-33: LAN Pinouts ......................
  • Page 13 IMBA-H110 ATX Motherboard BIOS Menus BIOS Menu 1: Main ........................82 BIOS Menu 2: Advanced ......................83 BIOS Menu 3: Trusted Computing ....................84 BIOS Menu 4: ACPI Configuration ....................85 BIOS Menu 5: Super IO Configuration ..................86 BIOS Menu 6: Serial Port 1 ~ 5 Configuration Menu ..............87 BIOS Menu 7: Parallel Port Configuration Menu ...............
  • Page 15 IMBA-H110 ATX Motherboard Chapter Introduction Page 1...
  • Page 16 IMBA-H110 ATX Motherboard 1.1 Introduction Figure 1-1: IMBA-H110 The IMBA-H110 is an ATX motherboard. It accepts a Socket LGA1151 Intel® Core™ i7/i5/i3, Pentium® or Celeron® processor and supports two 288-pin 2133 MHz dual-channel DDR4 DIMMs up to 64 GB. The IMBA-H110 provides two GbE interfaces through the Intel® I219LM and the Intel®...
  • Page 17 IMBA-H110 ATX Motherboard 1.2 Features Some of the IMBA-H110 motherboard features are listed below: ATX form factor  6th generation LGA1151 Intel® Core™ i7/i5/i3, Pentium® or Celeron®  processor supported Intel® H110 chipset  Two 288-pin 2133 MHz dual-channel unbuffered DDR4 DIMMs support up to ...
  • Page 18 IMBA-H110 ATX Motherboard 1.3 Connectors The connectors on the IMBA-H110 are shown in the figure below. Figure 1-2: Connectors Page 4...
  • Page 19 IMBA-H110 ATX Motherboard 1.4 Dimensions The main dimensions of the IMBA-H110 are shown in the diagram below. Figure 1-3: IMBA-H110 Dimensions (mm) Page 5...
  • Page 20 IMBA-H110 ATX Motherboard 1.5 Data Flow Figure 1-4 shows the data flow between the system chipset, the CPU and other components installed on the motherboard. Figure 1-4: Data Flow Diagram Page 6...
  • Page 21 IMBA-H110 ATX Motherboard 1.6 Technical Specifications The IMBA-H110 technical specifications are listed below. Specification/Model IMBA-H110 Form Factor 6th generation LGA1151 Intel® Core™ i7/i5/i3, Pentium® or CPU Supported Celeron® CPU Intel® H110 Two 288-pin 2133 MHz dual-channel unbuffered DDR4 Memory SDRAM DIMMs supported (system max. 64 GB) Intel®...
  • Page 22 IMBA-H110 ATX Motherboard Chassis Intrusion One 2-pin header Digital I/O 8-bit digital I/O Ethernet Two RJ-45 GbE ports One 4-pin CPU smart fan connector Two 3-pin system fan connectors One 14-pin header (power LED, HDD LED, speaker, power Front Panel...
  • Page 23 (4.0 GHz Intel® Core™ i7-6700K CPU with two 8 GB 2133 MHz DDR4 memory) Operating -20ºC ~ 60ºC Temperature Storage Temperature -30ºC ~ 70ºC Operating Humidity 5% ~ 95% (non-condensing) Physical Specifications Dimensions 244 mm x 305 mm 1200 g/700 g Weight (GW/NW) Table 1-1: IMBA-H110 Specifications Page 9...
  • Page 24 IMBA-H110 ATX Motherboard Chapter Packing List Page 10...
  • Page 25 Only handle the edges of the PCB: Don't touch the surface of the  motherboard. Hold the motherboard by the edges when handling. 2.2 Unpacking Precautions When the IMBA-H110 is unpacked, please do the following: Follow the anti-static guidelines above.  Make sure the packing box is facing upwards when opening.
  • Page 26 If any of the components listed in the checklist below are missing, do not proceed with the installation. Contact the IEI reseller or vendor the IMBA-H110 was purchased from or contact an IEI sales representative directly by sending an email to sales@ieiworld.com.
  • Page 27 IMBA-H110 ATX Motherboard 2.4 Optional Items The following are optional components which may be separately purchased: Item and Part Number Image LPT cable (P/N: 19800-000049-RS) Dual RS-232 cable, 230 mm, P=2.54 (P/N: 19800-020100-100-RS) PS/2 KB/MS Y-cable with bracket, 220 mm...
  • Page 28 IMBA-H110 ATX Motherboard Item and Part Number Image DisplayPort to LVDS converter board (for IEI iDP connector) (P/N: DP-LVDS-R10) DisplayPort to VGA converter board (for IEI iDP connector) (P/N: DP-VGA-R10) DisplayPort to DVI-D converter board (for IEI iDP connector) (P/N: DP-DVI-R10)
  • Page 29 IMBA-H110 ATX Motherboard Chapter Connectors Page 15...
  • Page 30 IMBA-H110 ATX Motherboard 3.1 Peripheral Interface Connectors This chapter details all the peripheral interface connectors. 3.1.1 IMBA-H110 Layout The figure below shows all the peripheral interface connectors. Figure 3-1: Peripheral Interface Connectors Page 16...
  • Page 31 IMBA-H110 ATX Motherboard 3.1.2 Peripheral Interface Connectors The table below lists all the connectors on the board. Connector Type Label 4-pin Molex power +12V power connector CPU12V1 connector Additional power connector 4-pin connector ATXPWR1 ATX power connector 24-pin connector ATX1...
  • Page 32 IMBA-H110 ATX Motherboard Connector Type Label PCIe Mini slot PCIe Mini slot MPCIE1 Power button Push button PWR_SW1 S_ATA1, S_ATA2, SATA 6Gb/s drive connector 7-pin SATA connector S_ATA3, S_ATA4 RS-232 serial ports 10-pin box header COM3, COM4 RS-232/422/485 serial port...
  • Page 33 IMBA-H110 ATX Motherboard 3.2 Internal Peripheral Connectors The section describes all of the connectors on the IMBA-H110. 3.2.1 +12V Power Connector CN Label: CPU12V1 CN Type: 4-pin Molex power connector, p=4.2 mm See Figure 3-2 CN Location: CN Pinouts: See Table 3-3 This connector provides power to the CPU.
  • Page 34 IMBA-H110 ATX Motherboard The additional power connector provides extra +12V and +5V power to the system. Figure 3-3: Additional Power Connector Location Description +12V Table 3-4: Additional Power Connector Pinouts 3.2.3 ATX Power Connector CN Label: ATX1 CN Type: 24-pin connector, p=4.2 mm...
  • Page 35 IMBA-H110 ATX Motherboard Figure 3-4: ATX Power Connector Location Description Description +3.3V +3.3V +3.3V -12V PS_ON Power good 5VSB +12V +12V +3.3V Table 3-5: ATX Power Connector Pinouts Page 21...
  • Page 36 IMBA-H110 ATX Motherboard 3.2.4 Battery Connector CAUTION: Risk of explosion if battery is replaced by an incorrect type. Only certified engineers should replace the on-board battery. Dispose of used batteries according to instructions and local regulations. CN Label: BAT1 CN Type:...
  • Page 37 IMBA-H110 ATX Motherboard 3.2.5 Chassis Intrusion Connector CN Label: CHASSIS1 CN Type: 2-pin header, p=2.54 mm CN Location: See Figure 3-6 CN Pinouts: See Table 3-6 The chassis intrusion connector is for a chassis intrusion detection sensor or switch that detects if a chassis component is removed or replaced.
  • Page 38 IMBA-H110 ATX Motherboard 3.2.6 CRT FW Update Connector CN Label: J_CRTFW1 CN Type: 3-pin header, p=2.00 mm CN Location: See Figure 3-7 CN Pinouts: See Table 3-7 The CRT FW update connector is used to update the CRT firmware. Figure 3-7: CRT FW Update Connector Location...
  • Page 39 IMBA-H110 ATX Motherboard Figure 3-8: DDR4 DIMM Slot Locations 3.2.8 Digital I/O Connector CN Label: DIO1 CN Type: 10-pin header, p=2.00 mm CN Location: See Figure 3-9 CN Pinouts: See Table 3-8 The digital I/O connector provides programmable input and output for external devices.
  • Page 40 IMBA-H110 ATX Motherboard Description Description Output 3 Output 2 Output 1 Output 0 Input 3 Input 2 Input 1 Input 0 Table 3-8: Digital I/O Connector Pinouts 3.2.9 EC Debug Connector CN Label: 18-pin header, p=2 mm CN Type: CN Location:...
  • Page 41 IMBA-H110 ATX Motherboard Description Description EC_EPP_PD2 EC_EPP_SLIN# EC_EPP_PD3 EC_EPP_PD4 EC_EPP_PD5 EC_EPP_BUSY EC_EPP_PD6 EC_EPP_KSI5 EC_EPP_PD7 EC_EPP_KSI4 Table 3-9: EC Debug Connector Pinouts 3.2.10 Fan Connector (CPU) CN Label: CPU_FAN1 CN Type: 4-pin wafer, p=2.54 mm See Figure 3-11 CN Location: CN Pinouts: See Table 3-10 The fan connector attaches to a CPU cooling fan.
  • Page 42 IMBA-H110 ATX Motherboard 3.2.11 Fan Connectors (System) CN Label: SYS_FAN1, SYS_FAN2 CN Type: 3-pin wafer, p=2.54 mm CN Location: See Figure 3-12 CN Pinouts: See Table 3-11 Each fan connector attaches to a system cooling fan. Figure 3-12: System Fan Connector Locations...
  • Page 43 IMBA-H110 ATX Motherboard 3.2.12 Front Panel Audio Connector CN Label: FRONT-PANEL1 CN Type: 10-pin header, p=2.54 mm CN Location: See Figure 3-13 CN Pinouts: See Table 3-12 This connector connects to speakers, a microphone and an audio input. Figure 3-13: Front Panel Audio Connector Location...
  • Page 44 IMBA-H110 ATX Motherboard 3.2.13 Front Panel Connector CN Label: F_PANEL1 CN Type: 14-pin header, p=2.54 mm CN Location: See Figure 3-14 CN Pinouts: See Table 3-13 The front panel connector connects to the indicator LEDs and buttons on the computer's front panel.
  • Page 45 IMBA-H110 ATX Motherboard 3.2.14 I C Connector CN Label: I2C1 CN Type: 4-pin wafer, p=1.25 mm CN Location: See Figure 3-15 CN Pinouts: See Table 3-14 The I C connector is used to connect I C-bus devices to the mainboard.
  • Page 46 IMBA-H110 ATX Motherboard 3.2.15 Internal DisplayPort Connector CN Label: CN Type: 20-pin box header, p=2.00 mm CN Location: See Figure 3-16 CN Pinouts: See Table 3-15 The DisplayPort connector supports HDMI, LVDS, VGA, DVI and DisplayPort graphics interfaces. Figure 3-16: Internal DisplayPort Connector Location...
  • Page 47 IMBA-H110 ATX Motherboard 3.2.16 Keyboard and Mouse Connector CN Label: KB_MS1 CN Type: 6-pin wafer, p=2 mm CN Location: See Figure 3-17 CN Pinouts: See Table 3-16 The keyboard and mouse connector connects to a PS/2 Y-cable that can be connected to a PS/2 keyboard and mouse.
  • Page 48 IMBA-H110 ATX Motherboard 3.2.17 LAN LED Connectors CN Label: LED_LAN1, LED_LAN2 CN Type: 2-pin header, p=2.54 mm CN Location: See Figure 3-18 CN Pinouts: See Table 3-17 The LAN LED connectors are used to connect to the LAN LED indicators on the chassis to indicate users the link activities of the two LAN ports.
  • Page 49 IMBA-H110 ATX Motherboard 3.2.18 Parallel Port Connector CN Label: LPT1 CN Type: 26-pin box header, p=2.54 mm CN Location: See Figure 3-19 CN Pinouts: See Table 3-18 The parallel port connector connects to a parallel port connector interface or some other parallel port device such as a printer.
  • Page 50 IMBA-H110 ATX Motherboard 3.2.19 PCI Slots CN Label: PCI1, PCI2, PCI3, PCI4, PCI5, PCI6 CN Type: PCI Slot CN Location: See Figure 3-20 Each PCI slot enables a PCI expansion module to be connected to the board. Figure 3-20: PCI Slot Locations...
  • Page 51 IMBA-H110 ATX Motherboard 3.2.20 PCI Express x16 Slot CN Label: PCIEX16_1 CN Type: PCIe x16 slot CN Location: See Figure 3-21 The PCIe x16 expansion card slot is for PCIe x16 expansion card. Figure 3-21: PCIe x16 Slot Location 3.2.21 PCIe Mini Slot...
  • Page 52 IMBA-H110 ATX Motherboard NOTE: If the user shorts the mSATA setup jumper (MSATA_SW1) to force the system to enable mSATA device or an mSATA device is detected, the S_ATA4 connector will be disabled. Please refer to Section 4.8.5. Figure 3-22: PCIe Mini Slot Location...
  • Page 53 IMBA-H110 ATX Motherboard Description Description SMB_CLK SATA_TX-/PCIE_TX- SMB_DATA SATA_TX+/PCIE_TX+ USB_DATA- USB_DATA+ +3.3V +3.3V +3.3V CLINK_CLK CLINK_DATA 1.5V CLINK_RST# MSATA_DET +3.3V Table 3-19: PCIe Mini Slot Pinouts 3.2.22 Power Button CN Label: PWR_SW1 CN Type: Push button CN Location: See Figure 3-23 The on-board power button controls system power.
  • Page 54 IMBA-H110 ATX Motherboard 3.2.23 RS-232 Serial Port Connector CN Label: COM3, COM4 CN Type: 10-pin box header, p=2.54 mm CN Location: See Figure 3-24 CN Pinouts: See Table 3-20 Each of these connectors provides RS-232 connections. Figure 3-24: RS-232 Serial Port Connector Locations...
  • Page 55 IMBA-H110 ATX Motherboard 3.2.24 RS-232/422/485 Serial Port Connector CN Label: COM5 CN Type: 10-pin box header, p=2.54 mm CN Location: See Figure 3-25 CN Pinouts: See Table 3-21 Each of these connectors provides RS-232, RS-422 or RS-485 communications. NOTE: The communication protocol of the serial port is set through the BIOS menu in “Advanced ...
  • Page 56 IMBA-H110 ATX Motherboard Use an RS-232/422/485 cable to connect to a serial device. The pinouts of the DB-9 connector are listed below. RS-232 Pinouts RS-422 Pinouts RS-485 Pinouts Table 3-22: DB-9 RS-232/422/485 Pinouts 3.2.25 SATA 6Gb/s Drive Connector CN Label:...
  • Page 57 IMBA-H110 ATX Motherboard Figure 3-26: SATA 6Gb/s Drive Connector Location Description SATA_TX+ SATA_TX- SATA_RX- SATA RX+ Table 3-23: SATA 6Gb/s Drive Connector Pinouts Page 43...
  • Page 58 IMBA-H110 ATX Motherboard 3.2.26 SMBus Connector CN Label: SMB1 CN Type: 4-pin wafer, p=1.25 mm CN Location: See Figure 3-27 CN Pinouts: See Table 3-24 The SMBus (System Management Bus) connector provides low-speed system management communications. Figure 3-27: SMBus Connector Location...
  • Page 59 IMBA-H110 ATX Motherboard 3.2.27 SPI Flash Connector CN Label: JSPI1 CN Type: 8-pin header, p=2.54 mm CN Location: See Figure 3-28 CN Pinouts: See Table 3-25 The SPI flash connector is used to flash the SPI ROM. Figure 3-28: SPI Flash Connector Location...
  • Page 60 IMBA-H110 ATX Motherboard 3.2.28 SPI Flash Connector, EC CN Label: JSPI2 CN Type: 8-pin header, p=2.54 mm CN Location: See Figure 3-29 CN Pinouts: See Table 3-26 The SPI flash connector is used to flash the EC ROM. Figure 3-29: SPI EC Flash Connector Location...
  • Page 61 IMBA-H110 ATX Motherboard 3.2.29 TPM Connector CN Label: TPM1 CN Type: 20-pin header, p=2.54 mm CN Location: See Figure 3-30 CN Pinouts: See Table 3-27 The TPM connector connects to a TPM module. Figure 3-30: TPM Connector Location Description Description...
  • Page 62 IMBA-H110 ATX Motherboard 3.2.30 USB 2.0 Connector (Type A) CN Label: USB2-3 CN Type: USB Type A CN Location: See Figure 3-31 CN Pinouts: See Table 3-28 The USB Type A connector connects to a USB 2.0/1.1 device. Figure 3-31: USB 2.0 Connector (Type A) Pinout Location...
  • Page 63 IMBA-H110 ATX Motherboard 3.2.31 USB 2.0 Connector CN Label: USB1 CN Type: 8-pin header, p=2.54 mm CN Location: See Figure 3-32 CN Pinouts: See Table 3-29 The USB 2.0 connector connects to USB 2.0 devices. Each pin header provides two USB 2.0 ports.
  • Page 64 IMBA-H110 ATX Motherboard 3.3 External Peripheral Interface Connector Panel The figure below shows the external peripheral interface connector (EPIC) panel. The EPIC panel consists of the following: Figure 3-33: External Peripheral Interface Connector 3.3.1 Audio Connector CN Label: AUDIO_CV1 CN Type:...
  • Page 65 IMBA-H110 ATX Motherboard Figure 3-34: Audio Connector 3.3.2 DVI-I and HDMI Connectors CN Label: DVI1, HDMI1 CN Type: 24-pin DVI-I, HDMI 1.4 CN Location: See Figure 3-33 CN Pinouts: See Table 3-30 and Table 3-31 The Digital Visual Interface (DVI) connector connects to a high-speed, high-resolution digital display.
  • Page 66 IMBA-H110 ATX Motherboard Description Description VCC5V HPDET DVI_DATA0# DVI_DATA0 DVI_CLK DVI_CLK# GREEN BLUE HSYNC Table 3-30: DVI-I Connector Pinouts Figure 3-35: DVI-I Connector The HDMI connector connects to a display device with HDMI interface. Description Description HDMI_DATA2 HDMI_DATA2# HDMI_SCL HDMI_DATA1...
  • Page 67 CN Type: RJ-45, USB 3.2 Gen 1 Type A CN Location: See Figure 3-33 CN Pinouts: See Table 3-32 and Table 3-33 There are four external USB 3.2 Gen 1 (5Gb/s) connectors on the IMBA-H110. Description Description USB_DATA- USB_DATA- USB_DATA+...
  • Page 68 IMBA-H110 ATX Motherboard 3.3.4 Keyboard/Mouse and USB 2.0 Connectors CN Label: K/M_USB1 CN Type: PS/2, USB 2.0 CN Location: See Figure 3-33 CN Pinouts: See Table 3-34 and Table 3-35 The USB 2.0 connector can be connected to a USB 2.0/1.1 device.
  • Page 69 IMBA-H110 ATX Motherboard 3.3.5 Serial Port Connectors CN Label: COM1 (top), COM2 (bottom) CN Type: DB-9 connector CN Location: See Figure 3-33 CN Pinouts: See Table 3-36 and Figure 3-37 The serial port connects to a RS-232 serial communications device.
  • Page 70 IMBA-H110 ATX Motherboard Chapter Installation Page 56...
  • Page 71 Electrostatic discharge (ESD) can cause serious damage to electronic components, including the IMBA-H110. Dry climates are especially susceptible to ESD. It is therefore critical that whenever the IMBA-H110 or any other electrical component is handled, the following anti-static precautions are strictly adhered to.
  • Page 72 Turn all power to the IMBA-H110 off:  When working with the IMBA-H110, make sure that it is disconnected from all power supplies and that no electricity is being fed into the system. Before and during the installation of the IMBA-H110, DO NOT: Remove any of the stickers on the PCB board.
  • Page 73 IMBA-H110 ATX Motherboard 4.3 Socket LGA1151 CPU Installation WARNING: CPUs are expensive and sensitive components. When installing the CPU please be careful not to damage it in anyway. Make sure the CPU is installed properly and ensure the correct cooling kit is properly installed.
  • Page 74 IMBA-H110 ATX Motherboard Figure 4-2: Remove Protective Cover Step 3: Inspect the CPU socket. Make sure there are no bent pins and make sure the socket contacts are free of foreign material. If any debris is found, remove it with compressed air.
  • Page 75 IMBA-H110 ATX Motherboard Step 7: Insert the CPU. Gently insert the CPU into the socket. If the CPU pins are properly aligned, the CPU should slide into the CPU socket smoothly. See Figure 4-3. Figure 4-3: Insert the Socket LGA1151 CPU Step 8: Close the CPU socket.
  • Page 76 IMBA-H110 ATX Motherboard Step 9: Connect the 12 V power to the board. Connect the 12 V power from the power supply to the board. Step 0: 4.4 Socket LGA1151 Cooling Kit Installation WARNING: DO NOT attempt to install a push-pin cooling fan.
  • Page 77 Do not overtighten the screws. Step 5: Connect the fan cable. Connect the cooling kit fan cable to the CPU fan connector on the IMBA-H110. Carefully route the cable and avoid heat generating chips and fan blades.Step 0:...
  • Page 78 IMBA-H110 ATX Motherboard 4.5 DIMM Installation To install a DIMM, please follow the steps below and refer to Figure 4-6. Figure 4-6: DIMM Installation Step 1: Open the DIMM socket handles. Open the two handles outwards as far as they can. See Figure 4-6.
  • Page 79 IMBA-H110 ATX Motherboard 4.6 Full-size PCIe Mini Card Installation The PCIe Mini card slot allows installation of either a full-size or half-size PCIe Mini card. To install a full-size PCIe Mini card, please follow the steps below. Step 1: Locate the PCIe Mini card slot. See Chapter 3.
  • Page 80 IMBA-H110 ATX Motherboard Step 4: Secure the full-size PCIe Mini card. Secure the full-size PCIe Mini card with the retention screw previously removed (Figure 4-9). Step 0: Figure 4-9: Securing the Full-size PCIe Mini Card 4.7 Half-size PCIe Mini Card Installation The PCIe Mini card slot allows installation of either a full-size or half-size PCIe Mini card.
  • Page 81 IMBA-H110 ATX Motherboard Figure 4-10: Installing the Standoff Step 3: Insert into the socket at an angle. Line up the notch on the card with the notch on the slot. Slide the PCIe Mini card into the slot at an angle of about 20º (Figure 4-11).
  • Page 82 IMBA-H110 ATX Motherboard Figure 4-12: Securing the Half-size PCIe Mini Card 4.8 System Configuration The system configuration should be performed before installation. 4.8.1 AT/ATX Power Mode Setting The AT and ATX power mode selection is made through the AT/ATX power mode switch which is shown in Figure 4-13.
  • Page 83 IMBA-H110 ATX Motherboard Setting Description ATX power mode (default) AT power mode Table 4-1: AT/ATX Power Mode Switch Settings 4.8.2 Clear CMOS Button To reset the BIOS, remove the on-board battery and press the clear CMOS button for three seconds or more. The clear CMOS button location is shown in Figure 4-14.
  • Page 84 IMBA-H110 ATX Motherboard Figure 4-15: DVI/CRT Selection Switch Location 4.8.4 Flash Descriptor Security Override The Flash Descriptor Security Override jumper (J_FLASH1) allows to enable or disable the ME firmware update. Refer to Figure 4-16 and Table 4-3 for the jumper location and settings.
  • Page 85 IMBA-H110 ATX Motherboard Step 1: Before turning on the system power, short pin 2-3 of the Flash Descriptor Security Override jumper. Step 2: Update the BIOS and ME firmware, and then turn off the system power. Step 3: Remove the metal clip on the Flash Descriptor Security Override jumper or return to its default setting (short pin 1-2).
  • Page 86 This section outlines the installation of peripheral devices to the onboard connectors. 4.9.1 SATA Drive Connection The IMBA-H110 is shipped with two SATA drive cables. To connect the SATA drives to the connectors, please follow the steps below. Step 1: Locate the connectors.
  • Page 87 IMBA-H110 ATX Motherboard Figure 4-18: SATA Drive Cable Connection Step 3: Connect the cable to the SATA disk. Connect the connector on the other end of the cable to the connector at the back of the SATA drive. See Figure 4-19.
  • Page 88 IMBA-H110 ATX Motherboard Figure 4-19: SATA Power Drive Connection The SATA power cable can be bought from IEI. See Optional Items in Section 2.4. 4.10 Adding USB 3.2 Drivers to a Windows 7 Installation Image The Windows 7 installation media does not include native driver support for USB 3.2. In order to use the USB keyboard or mouse connected to a USB 3.2 port during OS...
  • Page 89 IMBA-H110 ATX Motherboard Step 3: Extract the downloaded file to a temporary folder on a computer where the user has logged in as the administrator. NOTE: The OS version of the computer can be Windows 7, Windows 8.1 or Windows 10.
  • Page 90 Step 0: 4.11 Available Drivers All the drivers for the IMBA-H110 are available on IEI Resource Download Center (https://download.ieiworld.com). Type IMBA-H110 and press Enter to find all the relevant software, utilities, and documentation. Figure 4-22: IEI Resource Download Center...
  • Page 91 4.11.1 Driver Download To download drivers from IEI Resource Download Center, follow the steps below. Step 1: Go to https://download.ieiworld.com. Type IMBA-H110 and press Enter. Step 2: All product-related software, utilities, and documentation will be listed. You can choose Driver to filter the result.
  • Page 92 IMBA-H110 ATX Motherboard NOTE: To install software from the downloaded ISO image file in Windows 8, 8.1 or 10, double-click the ISO file to mount it as a virtual drive to view its content. On Windows 7 system, an additional tool (such as Virtual CD-ROM Control Panel from Microsoft) is needed to mount the file.
  • Page 93 IMBA-H110 ATX Motherboard Chapter BIOS Page 79...
  • Page 94 IMBA-H110 ATX Motherboard 5.1 Introduction The BIOS is programmed onto the BIOS chip. The BIOS setup program allows changes to certain system settings. This chapter outlines the options that can be changed. NOTE: Some of the BIOS options may vary throughout the life cycle of the product and are subject to change without prior notice.
  • Page 95 IMBA-H110 ATX Motherboard Function Page Up Move to the previous page Page Dn Move to the next page Main Menu – Quit and not save changes into CMOS Status Page Setup Menu and Option Page Setup Menu -- Exit current page and return to Main Menu...
  • Page 96 IMBA-H110 ATX Motherboard 5.2 Main The Main BIOS menu (BIOS Menu 1) appears when the BIOS Setup program is entered. The Main menu gives an overview of the basic system information. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc.
  • Page 97 IMBA-H110 ATX Motherboard The Main menu has two user configurable fields: System Date [xx/xx/xx]  Use the System Date option to set the system date. Manually enter the day, month and year. System Time [xx:xx:xx]  Use the System Time option to set the system time. Manually enter the hours, minutes and seconds.
  • Page 98 IMBA-H110 ATX Motherboard 5.3.1 Trusted Computing Use the Trusted Computing menu (BIOS Menu 3) to configure settings related to the Trusted Computing Group (TCG) Trusted Platform Module (TPM). Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Advanced Configuration...
  • Page 99 IMBA-H110 ATX Motherboard 5.3.2 ACPI Settings The ACPI Settings menu (BIOS Menu 4) configures the Advanced Configuration and Power Interface (ACPI) options. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Advanced ACPI Settings Select the highest ACPI sleep state the system...
  • Page 100 IMBA-H110 ATX Motherboard 5.3.3 Super IO Configuration Use the Super IO Configuration menu (BIOS Menu 5) to set or change the configurations for the parallel ports and serial ports. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Advanced...
  • Page 101 IMBA-H110 ATX Motherboard 5.3.3.1 Serial Port 1 ~ 5 Configuration Use the Serial Port 1 ~ 5 Configuration menu (BIOS Menu 6) to configure the serial ports. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Advanced Serial Port n Configuration...
  • Page 102 IMBA-H110 ATX Motherboard 5.3.3.3 Serial Port 2 Configuration Serial Port [Enabled]  Use the Serial Port option to enable or disable the serial port.  Disabled Disable the serial port  Enabled Enable the serial port EFAULT Change Settings [IO=2F8h; IRQ=3;] ...
  • Page 103 IMBA-H110 ATX Motherboard  IO=3F8h; Serial Port I/O port address is 3F8h and the interrupt IRQ=3, 4, 11 address is IRQ3, 4, 11  IO=2F8h; Serial Port I/O port address is 2F8h and the interrupt IRQ=3, 4, 11 address is IRQ3, 4, 11 ...
  • Page 104 IMBA-H110 ATX Motherboard  IO=3E8h; Serial Port I/O port address is 3E8h and the interrupt IRQ=3, 4, 11 address is IRQ3, 4, 11  IO=2E8h; Serial Port I/O port address is 2E8h and the interrupt IRQ=3, 4, 11 address is IRQ3, 4, 11 ...
  • Page 105 IMBA-H110 ATX Motherboard  IO=2D0h; Serial Port I/O port address is 2D0h and the interrupt IRQ=3, 4, 11 address is IRQ3, 4, 11  IO=2E0h; Serial Port I/O port address is 2E0h and the interrupt IRQ=3, 4, 11 address is IRQ3, 4, 11 Transfer Mode [RS232] ...
  • Page 106 IMBA-H110 ATX Motherboard Device Mode [STD Printer Mode]  Use the Device Mode option to select the mode the parallel port operates in. Configuration options are listed below. Default STD Printer Mode  SPP Mode  EPP-1.9 and SPP Mode ...
  • Page 107 IMBA-H110 ATX Motherboard System Temperatures:  CPU Temperature System Temperature Fan Speed:  CPU Fan Speed System Fan Speed Voltages:  CPU_CORE +12V +DDR +5VSB +3.3V +3.3VSB 5.3.4.1 Smart Fan Mode Configuration Use the Smart Fan Mode Configuration submenu (BIOS Menu 9) to configure the CPU/system fan temperature and speed settings.
  • Page 108 IMBA-H110 ATX Motherboard CPU_FAN1 Smart Fan Control/SYS_FAN1 Smart Fan Control [Auto Mode]  Use the CPU_FAN1 Smart Fan Control/SYS_FAN1 Smart Fan Control option to configure the CPU/System Smart Fan.  Auto Mode The fan adjusts its speed using Auto Mode EFAULT settings.
  • Page 109 IMBA-H110 ATX Motherboard Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Advanced Wake system with Fixed Time [Disabled] Enable or disable System wake on alarm event. When enabled, System will wake on the date::hr::min::sec specified ---------------------- : Select Screen ↑...
  • Page 110 IMBA-H110 ATX Motherboard 5.3.6 Serial Port Console Redirection The Serial Port Console Redirection menu (BIOS Menu 11) allows the console redirection options to be configured. Console redirection allows users to maintain a system remotely by re-directing keyboard input and text output through the serial port.
  • Page 111 IMBA-H110 ATX Motherboard  VT100 The target terminal type is VT100  VT100+ The target terminal type is VT100+  VT-UTF8 The target terminal type is VT-UTF8  ANSI The target terminal type is ANSI EFAULT Bits per second [115200] ...
  • Page 112 IMBA-H110 ATX Motherboard  Mark The parity bit is always 1. This option does not provide error detection.  Space The parity bit is always 0. This option does not provide error detection. Stop Bits [1]  Use the Stop Bits option to specify the number of stop bits used to indicate the end of a serial data packet.
  • Page 113 IMBA-H110 ATX Motherboard 5.3.7 CPU Configuration Use the CPU Configuration menu (BIOS Menu 13) to view detailed CPU specifications or enable the Intel Virtualization Technology. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Advanced CPU Configuration Number of cores to enable in each processor Intel(R) Core(TM) i5-6500TE CPU @ 2.30GHz...
  • Page 114 IMBA-H110 ATX Motherboard Intel Virtualization Technology [Disabled]  Use the Intel Virtualization Technology option to enable or disable virtualization on the system. When combined with third party software, Intel® Virtualization technology allows several OSs to run on the same system at the same time.
  • Page 115 IMBA-H110 ATX Motherboard 5.3.8 SATA Configuration Use the SATA Configuration menu (BIOS Menu 14) to change and/or set the configuration of the SATA devices installed in the system. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Advanced SATA Controller(s)
  • Page 116 IMBA-H110 ATX Motherboard 5.3.9 NVMe Configuration Use the NVMe Configuration (BIOS Menu 15) menu to display the NVMe controller and device information. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Advanced NVMe controller and Drive information No NVMe Device Found --------------------- : Select Screen...
  • Page 117 IMBA-H110 ATX Motherboard 5.3.10 USB Configuration Use the USB Configuration menu (BIOS Menu 16) to read USB configuration information and configure the USB settings. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Advanced USB Configuration Enables Legacy USB support.
  • Page 118 IMBA-H110 ATX Motherboard 5.3.11 iEi Feature Use the iEi Feature menu (BIOS Menu 17) to configure One Key Recovery function. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Advanced iEi Feature Auto Recovery Function Reboot and recover Auto Recovery Function...
  • Page 119 IMBA-H110 ATX Motherboard 5.4 Chipset Use the Chipset menu (BIOS Menu 18) to access the PCH IO and System Agent (SA) configuration menus. WARNING! Setting the wrong values for the Chipset BIOS selections in the Chipset BIOS menu may cause the system to malfunction.
  • Page 120 IMBA-H110 ATX Motherboard 5.4.1 System Agent (SA) Configuration Use the System Agent (SA) Configuration menu (BIOS Menu 19) to configure the System Agent (SA) parameters. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Chipset VT-d Supported VT-d capability...
  • Page 121 IMBA-H110 ATX Motherboard 5.4.1.1 Graphics Configuration Use the Graphics Configuration (BIOS Menu 20) menu to configure the video device connected to the system. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Chipset Graphics Configuration Select which of IGFX/PEG/PCI Graphics...
  • Page 122 IMBA-H110 ATX Motherboard DVMT Pre-Allocated [32M]  Use the DVMT Pre-Allocated option to set the amount of system memory allocated to the integrated graphics processor when the system boots. The system memory allocated can then only be used as graphics memory, and is no longer available to applications or the operating system.
  • Page 123 IMBA-H110 ATX Motherboard 5.4.1.2 PEG Port Configuration Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Chipset PEG Port Configuration Enable or Disable the Root Port PEG 0:1:0 Not Present Enable Root Port [Enabled] ---------------------- Max Link Speed [Auto] : Select Screen...
  • Page 124 IMBA-H110 ATX Motherboard  Disabled Disables to detect if a non-compliance PCI EFAULT Express device is connected to the PCI Express slot.  Enabled Enables to detect if a non-compliance PCI Express device is connected to the PCI Express slot.
  • Page 125 IMBA-H110 ATX Motherboard 5.4.2 PCH-IO Configuration Use the PCH-IO Configuration menu (BIOS Menu 23) to configure the PCH parameters. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Chipset Auto Power Button Status [Disable (ATX)] Select AC power state...
  • Page 126 IMBA-H110 ATX Motherboard USB Power SW1 [+5V DUAL]  Use the USB Power SW1 BIOS option to configure the USB power source for the corresponding USB connectors (Table 5-2).  +5V DUAL Sets the USB power source to +5V dual EFAULT ...
  • Page 127 IMBA-H110 ATX Motherboard 5.4.2.1 PCI Express Configuration Use the PCI Express Configuration submenu (BIOS Menu 24) to configure the PCIe Mini slot. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Chipset PCI Express Configuration MPCIE1 Slot Settings. > MPCIE1 Slot ---------------------- : Select Screen...
  • Page 128 IMBA-H110 ATX Motherboard PCIe Speed [Auto]  Use this option to select the support type of the PCI Express slots. The following options are available: Auto Default  Gen1  Gen2  Gen3  Detect Non-Compliance Device [Disabled]  Use the Detect Non-Compliance Device option to enable or disable detecting if a non-compliance PCI Express device is connected to the PCI Express slot.
  • Page 129 IMBA-H110 ATX Motherboard 5.4.2.2 HD Audio Configuration Use the HD Audio Configuration menu (BIOS Menu 26) to configure the PCH Azalia settings. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Chipset HD Audio Configuration Control Detection of the HD-Audio device.
  • Page 130 IMBA-H110 ATX Motherboard 5.5 Security Use the Security menu (BIOS Menu 27) to set system and user passwords. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Main Advanced Chipset Security Boot Save & Exit Password Description Set Administrator Password If ONLY the Administrator’s password is set,...
  • Page 131 IMBA-H110 ATX Motherboard 5.6 Boot Use the Boot menu (BIOS Menu 28) to configure system boot options. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Main Advanced Chipset Security Boot Save & Exit Boot Configuration Select the keyboard...
  • Page 132 IMBA-H110 ATX Motherboard Quiet Boot [Enabled]  Use the Quiet Boot BIOS option to select the screen display when the system boots.  Disabled Normal POST messages displayed  Enabled OEM Logo displayed instead of POST messages EFAULT Launch PXE OpROM [Disabled] ...
  • Page 133 IMBA-H110 ATX Motherboard 5.7 Save & Exit Use the Safe & Exit menu (BIOS Menu 29) to load default BIOS values, optimal failsafe values and to save configuration changes. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Main...
  • Page 134 IMBA-H110 ATX Motherboard Appendix Regulatory Compliance Page 120...
  • Page 135 IMBA-H110 ATX Motherboard DECLARATION OF CONFORMITY This equipment has been tested and found to comply with specifications for CE marking. If the user modifies and/or installs other devices in the equipment, the CE conformity declaration may no longer apply. FCC WARNING This equipment complies with Part 15 of the FCC Rules.
  • Page 136 IMBA-H110 ATX Motherboard Appendix Product Disposal Page 122...
  • Page 137 IMBA-H110 ATX Motherboard CAUTION: Risk of explosion if battery is replaced by an incorrect type. Only certified engineers should replace the on-board battery. Dispose of used batteries according to instructions and local regulations. Outside the European Union–If you wish to dispose of used electrical and ...
  • Page 138 IMBA-H110 ATX Motherboard Appendix BIOS Options Page 124...
  • Page 139 IMBA-H110 ATX Motherboard Below is a list of BIOS configuration options in the BIOS chapter. System Date [xx/xx/xx] ......................83 System Time [xx:xx:xx] ....................... 83 Security Device Support [Disable] ..................84 ACPI Sleep State [S3 (Suspend to RAM)] ................85 Case Open Detection [Disabled] ..................
  • Page 140 IMBA-H110 ATX Motherboard Intel(R) SpeedStep(tm) [Enabled] ..................100 CPU C states [Disabled] ....................100 Intel TXT(LT) Support [Disabled] ..................100 SATA Controller(s) [Enabled] ...................101 SATA Mode Selection [AHCI] ....................101 Hot Plug [Disabled] ......................101 Legacy USB Support [Enabled] ..................103 Auto Recovery Function [Disabled] .................104 VT-d [Disabled] ........................106...
  • Page 141 IMBA-H110 ATX Motherboard Restore User Defaults .......................119 Page 127...
  • Page 142 IMBA-H110 ATX Motherboard Appendix Digital I/O Interface Page 128...
  • Page 143 IMBA-H110 ATX Motherboard D.1 Introduction The DIO connector on the IMBA-H110 is interfaced to GPIO ports on the Super I/O chipset. The digital inputs and digital outputs are generally control signals that control the on/off circuit of external devices or TTL devices. Data can be read or written to the selected address to enable the DIO functions.
  • Page 144 IMBA-H110 ATX Motherboard D.2 Assembly Language Sample 1 AX, 6F08H ;setting the digital port as input AL low byte = value AH – 6FH Sub-function: AL – 9 :Set the digital port as OUTPUT :Digital I/O input value D.3 Assembly Language Sample 2 AX, 6F09H ;setting the digital port as output...
  • Page 145 IMBA-H110 ATX Motherboard Appendix Watchdog Timer Page 131...
  • Page 146 IMBA-H110 ATX Motherboard NOTE: The following discussion applies to DOS environment. Contact IEI support or visit the IEI website for specific drivers for other operating systems. The Watchdog Timer is provided to ensure that standalone systems can always recover from catastrophic conditions that cause the CPU to crash. This condition may have occurred by external EMIs or a software bug.
  • Page 147 IMBA-H110 ATX Motherboard NOTE: When exiting a program it is necessary to disable the Watchdog Timer, otherwise the system resets. EXAMPLE PROGRAM: ; INITIAL TIMER PERIOD COUNTER W_LOOP: AX, 6F02H ;setting the time-out value BL, 30 ;time-out value is 48 seconds ;...
  • Page 148 IMBA-H110 ATX Motherboard Appendix Error Beep Code Page 134...
  • Page 149 IMBA-H110 ATX Motherboard F.1 PEI Beep Codes Number of Beeps Description Memory not Installed Memory was installed twice (InstallPeiMemory routine in PEI Core called twice) Recovery started DXEIPL was not found DXE Core Firmware Volume was not found Recovery failed...
  • Page 150 IMBA-H110 ATX Motherboard Appendix Hazardous Materials Disclosure Page 136...
  • Page 151 IMBA-H110 ATX Motherboard G.1 RoHS II Directive (2015/863/EU) The details provided in this appendix are to ensure that the product is compliant with the RoHS II Directive (2015/863/EU). The table below acknowledges the presences of small quantities of certain substances in the product, and is applicable to RoHS II Directive (2015/863/EU).
  • Page 152 IMBA-H110 ATX Motherboard G.2 China RoHS 此附件旨在确保本产品符合中国 RoHS 标准。以下表格标示此产品中某有毒物质的含量符 合中国 RoHS 标准规定的限量要求。 本产品上会附有”环境友好使用期限”的标签，此期限是估算这些物质”不会有泄漏或突变”的 年限。本产品可能包含有较短的环境友好使用期限的可替换元件，像是电池或灯管，这些 元件将会单独标示出来。 部件名称 有毒有害物质或元素 壳体 显示 印刷电路板 金属螺帽 电缆组装 风扇组装 电力供应组装 电池 O: 表示该有毒有害物质在该部件所有物质材料中的含量均在 SJ/T11364-2014 與 GB/T26572-2011 标准规定的限量要求以下。 X: 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T11364-2014 與 GB/T26572-2011 标准规定的限量要求。 Page 138...