Chassis Intrusion Connector; Ddr3 Dimm Slots; Figure 3-6: Chassis Intrusion Connector Location; Table 3-6: Chassis Intrusion Connector Pinouts - IEI Technology IMBA-H810 User Manual

IMBA-H810 ATX Motherboard

3.2.5 Chassis Intrusion Connector

CN Label: CHASSIS1
2-pin header, p=2.54 mm
CN Type:
CN Location: See
CN Pinouts: See Table 3-6
The chassis intrusion connector is for a chassis intrusion detection sensor or switch that
detects if a chassis component is removed or replaced.

Figure 3-6: Chassis Intrusion Connector Location

Pin Description
1 +3.3VSB
2 CHASSIS OPEN

Table 3-6: Chassis Intrusion Connector Pinouts

3.2.6 DDR3 DIMM Slots

CN Label: CHA_DIMM1, CHB_DIMM1
CN Type: DDR3 DIMM slot
CN Location: See
The DIMM slots are for DDR3/DDR3L DIMM memory modules.
F igure 3-6
6
F igure 3-7
6
Page 23