Table of Contents
Advertisement
IMBA-H810 ATX Motherboard
NOTE:
If the user shorts the mSATA setup jumper (MSATA_SW1) to force the
system to enable mSATA device or an mSATA device is detected, the
SATA4 connector will be disabled. Please refer to Section 0.
3.2.25 SATA 6Gb/s Drive Connector
CN Label:
S_ATA1, S_ATA2
7-pin SATA drive connector
CN Type:
CN Location:
See Figure 3-26
CN Pinouts:
See Table 3-21
The SATA drive connectors can be connected to SATA drives and support up to 6Gb/s
data transfer rate.
Figure 3-26: SATA 6Gb/s Drive Connector Location
Page 41
Advertisement
Table of Contents
