Table of Contents
Advertisement
IMBA-H810 ATX Motherboard
5.4.2.2 NB PCIe Configuration
Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc.
Chipset
NB PCIe Configuration
PEG0
PEG0 – Gen X
Enable PEG
Detect Non-compliance Device
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
BIOS Menu 26: NB PCIe Configuration
PEG0 – Gen X [Auto]
Use the PEG0 – Gen X option to select the support type of the PCI Express x16 slot. The
following options are available:
Auto
Gen1
Gen2
Gen3
Enable PEG [Auto]
Use the Enable PEG option to enable or disable the PCI Express (PEG) controller.
Disabled
Enabled
Auto
Not Present
[Auto]
[Auto]
[Disabled]
Default
Disables the PCI Express (PEG) controller.
Enables the PCI Express (PEG) controller.
The PCI Express (PEG) controller is disabled if no
D
EFAULT
PCI Express devices are connected.
Configure PEG0 B0:D1:F0
Gen1-Gen3 (PCIEX16_1
Slot)
----------------------
: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1:
General Help
F2:
Previous Values
F3:
Optimized Defaults
F4:
Save & Exit
ESC: Exit
Page 109
Advertisement
Table of Contents
