Iwdd H/W Monitor - IEI Technology IMBA-H810 User Manual

IO=278h;
IRQ=5, 7
IO=3BCh;
IRQ=5, 7
Device Mode [STD Printer Mode]
Use the Device Mode option to select the mode the parallel port operates in.
Configuration options are listed below.
STD Printer Mode
SPP Mode
EPP-1.9 and SPP Mode
EPP-1.7 and SPP Mode
ECP Mode
ECP and EPP 1.9 Mode
ECP and EPP 1.7 Mode

5.3.10 iWDD H/W Monitor

The iWDD H/W Monitor menu (BIOS Menu 14) contains the fan configuration submenu,
and displays operating temperature, fan speeds and system voltages..
Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc.
Advanced
PC Health Status
> Smart Fan Mode Configuration
CPU Temperature
SYS Temperature
CPU_FAN1 Speed
SYS_FAN1 Speed
CPU_CORE
+5V
+12V
DDR
+5VSB
+3.3V
+3.3VSB
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
BIOS Menu 14: iWDD H/W Monitor
Page 94
IMBA-H810 ATX Motherboard
Parallel Port I/O port address is 278h and the
interrupt address is IRQ5, 7
Parallel Port I/O port address is 3BCh and the
interrupt address is IRQ5, 7
Default
:+47ºC
:+29ºC
:990 RPM
:N/A
:+1.743 V
:+5.142 V
:+12.175 V
:+1.507 V
:+4.937 V
:+3.301 V
:+3.329 V
Smart Fan Mode Select
---------------------
: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit