Bellfires View Bell Medium 3 CF Installation Manual page 55

This instruction gives installation instructions for the safe installation of a decoration kit,
or the conversion from the original log set to a decoration kit, in your gas appliance.
These decoration kits are only for use in a Bellfi res View Bell Medium 3 Centre Fire
(CF) gas appliance.
The following decoration kits can be installed in the appliance:
Direct Vent Gas Fireplace: Bellfi res View Bell Medium 3 CF
Fire Proof Material
Stone Pebbles
Crushed Glass
• It is not allowed to mix different decoration kits!
• It is not allowed to use more decoration material (pebbles/glass) then
mentioned in above table.
• Put max. 1 layer of decoration material on the burner and grate!
The content of a decoration kit :
• Set of pebbles or glass, in the amount as approved for the appliance.
• Installation instructions
WARNING:
The installation/conversion shall be carried out by qualifi ed service agency,
in accordance with the requirements of the manufacturer, provincial or
territorial authorities having jurisdiction and in accordance with the
requirements of the CAN/CGA-B149.1 or CAN/CGA-B149.2 installation codes.
If the information in these instruction is not followed exactly, a fi re,
explosion or production of carbon monoxide may result causing property
damage, personal injury or loss of life.
The qualifi ed service agency is responsible for the proper installation of
this kit.
The installation is not proper and complete until the operation of the
converted appliance is checked as specifi ed in the manufacturer's
instructions supplied with the kit.
Bellfi res
GAS FIRE DECORATION KITS
Size
½" - 1¼" (12-30 mm)
½" - 1¼" (12-30 mm)
55
Weight Volume
16.5 lbs (7.5 kg) 0.16 Ft
10.3 lbs (4.7 kg) 0.12 Ft
Installation instructions
3 3
(4.5 dm )
3 (3.3 dm 3 )