Bellfires View Bell Medium 3 CF Installation Manual page 40

• Position the gas supply pipe such that it can be easily mounted after installation.
Because the control system is outside the appliance, the gas pipe must lead to where
the operating unit (built in), the gas regulator block (and the receiver) assembly are
fi tted.
• Position the appliance in accordance with the installation instructions in chapter;
CLEARANCES. Use only the specifi ed insulation plates.
• Attach the appliance to the rear wall with 2 wedge bolts. Use the adjustable mounting
brackets at the side of the appliance for this.
Connection of the appliance to gas supply must be performed by a qualifi ed
installer, service agency or the gas supplier. Follow the local codes.
During gas connection, take care not to twist the gas regulator block.
Make sure that both the gas regulator block and the supply pipes are
not subjected to stresses.
Bellfi res
POSITIONING THE APPLIANCE
- 2x Mounting bracket.
WARNING:
IMPORTANT:
40 Installation instructions